LH4371
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by LH4371
-
-
-
On 3/29/2025 at 8:22 PM, IniSteve said:
HI. I need to confirm winwing has actually reached out to us but in the interim we'll take a look and see what we can uncover regarding compatibility.
Any update on this steve? Received my WinWing MCDU yesterday and I am literally blown away how great it is in terms of immersion and just usability of MSFS without requiring to change my viewpoint all the time. And all at such a meager price point.
So I was zipping around in the Fenix for about 10 hours yesterday, doing some stress test of the new MCDU. Just to realize when switching to the 350 that my ini350 does not support it, knowing about the different MCDU logic of an 350 (or 380) vs a 3X0.
-
8 minutes ago, jonathan said:
Ich habe es einfach gelöscht und die 350 deinstalliert und ich habe es neu installiert und ich sehe, was es gibt
Trés bien, please report back how and whether that helped
-
15 minutes ago, jonathan said:
le dossier ce trouve je le trouve pas
-
Strange. Did you update to v1.08 and did you clear/delet the wasm folder before loading the plane. Just to rule this step out?
-
What crashes? The plane or MSFS altogether?
do you fly SU2 Beta or Live Build SU1? Do you fly live weather? Heavy windshifts / turbulences can cause the autopilot to disconnect
-
CTD at KBOS
in Other
just started yet another flight from KBOS and right after takeoff the engines failed - may have been coincidence - but when I wanted to restart the flight, 2024 CTDed again.
Agin, just sharing as I am stilll unsure this is an A350 issue or scnery issue. Will try another airport now and report back
-
CTD at KBOS
in Other
Just sharing in case I am not alone. I am on v04, deleted wasm before. Did a flight EDDM KBOS and all fine. But just upon touchdown when the wheels literally touched ground the sim 2024 froze and then CTDed …
This was with 3pd scenery, believe FSDT. But I landed there before even in the 350 and all fine…
-
Found him too. But how can I get rid of the copilot? Found no setting on the EFB…?
-
On 3/10/2025 at 6:03 PM, Rene Feijen said:
Anyone has an idea?
Afaik this is standard behaviour. For me it helps to click the red A/P button on that Virtual Joystick = sidestick to silence the Alarm. Pressing the physical button on my „real“ sidestick does not help though what may be a keybinding issue.
-
ok, must have remembered wrong as this is from the How To section, so no mouse scrolling:
-
On 3/5/2025 at 2:10 PM, Norwenkel said:
I would highly appreciate the possibility to import a flight plan from simbrief when the engines are running. Maybe through the Sec. F-PLN option to copy and activate it like it´s done with other airliners.
that is exactly how it works here, too. select SEC1 and then import and click "make active". using it most of the times myself
-
1
-
-
22 minutes ago, ekosif said:
I understand that but what is the point keeping it on the AUTO if you are not going to use it at specific condition? Just switch it to Auto when you want to use it. At the end of the day, auto selection is not there to automatically enable/disable it, it's there to adjust time compression level when it is activated.
because auto does not mean like automatic if it is on anyway always. then call it ON and off and have a clickspot somewhere. but needless to discuss any further. I typically have it off now
-
12 minutes ago, ekosif said:
No, I disagree with this one. Sometimes I am using it for accelerate the boarding to save some time and this is also valid for all other aircrafts like pmdg. If you don't want to use this function on the ground simply change the time compression from auto to off in the OIS.
hence I suggested to make it an option to disable compression when on the ground.
-
interesting as I could swear I clicked underneath the scroll bar in a previous version and it scrolled down? like where the cursor is on the pic below....
-
anybody else unable to scroll down the STAR list (maybe any other list, just found it myself when trying to select LOGAN2H for 27L at EGLL)? Clicking on that scroll bar did not work, had to use the little scroll wheel futher down on the pedastral until LOGAN2H shown and could only then click on it? I am on latest v0.3
-
Did not check with latest v0.3 but yesterday I realized with time compression on AUTO that it also kicked in on the ground during pushback and taxi. while this may speed up lining up with the active runway I found this quite cumbersome when you are wiggling around corners and along taxiways with x4 compression. maybe it could make sense to make it an option to enable time compression NOT on the ground but only when enroute?
-
I use Mobiflight with the MiniFCU and an 350 profile from flightsim.to with no problems. switched to Mobiflight some months ago and don't regret it, you need to flash the MiniFCU with Mobiflight but can always return to the original MiniCockpit software.
-
On 3/3/2025 at 2:03 PM, Manuel1989 said:
The taxiing sound remains too constant, with no noticeable difference between low, medium, and high speeds.
agreed. just taxiied at EDDM at idle and below 40kts it is very repetitive, sounds like a little drummer boy. found this also quite annoying TBH
Also, was nose gear sound turned down in the latest .3 update? This time I could hardly hear the nose gear winds when retracting the gear after takeoff
-
1
-
-
not fully my topic, updated and cleared the WASM cache but during cockpit prep the MCDU reaction got worse, quite laggy actual. cursor not very reactive, clicking often only accepted after second click. again, it worked but became laggy. this was not from the very beginning, though. it started during cockpit prep after I loaded SB flightplan and configured the MCDU fully. enroute now all semmingly fine again, maybe just a hickup. FWIW
-
19 hours ago, Erik32 said:
Ahh okei thanks ! 😄
also, may be helpful to share which MSFS version you use, 2020 or 2024?
-
Which MSFS version do you use? I have zero issues - except some minor which may be user error - in 2024.
-
EDIT, must be one of these funny things. Just started a flight EKCH to EGLL and I DO hear ATC - though still no megaphone shown on the radio stack?!
-
All, yes I read the manual but it only says to push the Call button and pull that knob, yet I do not see that megaphone icon and can only hear myself transmitting to ATC. I can READ what ATC responds to me but cannot hear. How do I get that megaphone icon?
Pushed knob: x correctly shown
Pulled knob: zero nade niente
what am I missing?
Displays flashing when switching from external view mode
in Modelling & Texturing
Posted · Edited by LH4371
Same with latest su3b but only happens since definitely the 1.0.11 update (did not see that with v1.0.10 actually but did not fly the 350 too often recently with the WW MCDU not being compatible with the ini planes...)