[Vars not working]

Here's a list of all the LVars I used in the end. All working really well now:

https://github.com/scott-vincent/instrument-data-link/blob/master/instrument-data-link/LVars-A310.h

[Vars not working]

Problem solved with the fuel valves thanks to @b3lt3r
They are actually mapped to the SET ENGINE MASTER 1 & 2 controls so I don't need LVars for them anymore.

[LVars for Engine Fuel Valves]

Thanks @b3lt3r, you've solved the mystery. They've used the wrong controls for the A310.
Instead of using SET ENGINE 1 & 2 FUEL VALVES they've used SET ENGINE MASTER 1 & 2.

Working perfectly now, thanks.

[LVars for Engine Fuel Valves]

Please could somebody tell me how to turn the fuel valves on (the ENG1 and ENG2 switches just below the throttles).
I've tried setting the following LVars to 1 but they don't work:

A310_ENG1_MIXTURE_COMMAND
A310_ENG2_MIXTURE_COMMAND

I've tried lots of other LVars as well but can't seem to find the right ones.

Thanks

[Vars not working]

@Traveler Ray Yes, tried those thanks but if I set them to 1 they don't turn on the valves.

[Vars not working]

Found just about everything I need now apart from the engine fuel valves.

[Vars not working]

I'm also struggling to find the settings for ENG1 and ENG2 fuel valves.

I did find the settings for the eng ignition and starters though. These are:

A310_ENG_IGNITION_SWITCH
A310_ENG1_STARTER
A310_ENG2_STARTER
 

[Vars not working]

Does anybody know how to turn on Localiser Capture (V/L button in cockpit).

I can read the value using L:A310_LOCALIZER_BUTTON but if I write the value it doesn't work.

[Vars not working]

The values I posted are for using the FS2020 SDK directly via SimConnect, not through any third-party software. They are the values that the actual aircraft is using.

[Vars not working]

There seems to be some incorrect information on this thread. For those of you still confused about Lights, these are the correct values:

A310_BEACON_LIGHT_SWITCH          (0 = Off, 1 = On)
A310_LANDING_LIGHT_L_SWITCH     (0 = On, 2 = Off)
A310_LANDING_LIGHT_R_SWITCH     (0 = On, 2 = Off)
A310_TAXI_LIGHTS_SWITCH               (0 = T.O., 1 = Taxi, 2 = Off)
A310_RWY_TURNOFF_L_SWITCH       (0 = Off, 1 = On)
A310_RWY_TURNOFF_R_SWITCH       (0 = Off, 1 = On)
A310_NAV_LOGO_LIGHT_SWITCH      (0 = On, 2 = Off)
A310_POTENTIOMETER_24                (0 = Strobe On, 2 = Strobe Off)

[Vars not working]

The following are working for me:

A310_BEACON_LIGHT_SWITCH    (0 = off, 1 = on)
A310_POTENTIOMETER_24          (iStrobes, 2 = off, 0 = on)

but I can't get these to work (they always read 0):

A310_LANDING_LIGHT_SWITCH
A310_TAXI_LIGHT_SWITCH
A310_NAV_LIGHT_SWITCH