browns11

Same here too!

Hello, Recently purchased KCAK and installed fine; shows in Community Folder and airport opens fine in MSFS 2020. However, when I log into iniManager later, it does not show as installed (just owned/available). Same with each following update installed (at 2.0.0. now). I have 77 airports in iniManager and all are fine; it's just an issue with KCAK. Not critical, but wanted to ask for your help to resolve. Thank you! Mike

Thank you for checking into this Zoey! Have you had any luck? If I can help in any way, I am glad to! Best Regards, Mike P.S. iniBuilds just corrected the same issue I found in LDDU.

Thank you!! I appreciate the reply and help!

Hello, Great work on LDDU! While it has been a bit since I was there, it looks excellent! I would like to ask for your help. I just landed there in the PMDG 737-700 and after exiting the runway and transferring to ground, ATC did not give me a "Taxi to Gate" option; just Taxi to Parking (GA), Ground Services, Takeoff Options, etc. I could hear ATC giving other airline traffic (an ATR) taxi to gate instructions (gate assignment & routing). If I can provide any info to help, please let me know! Thank you for your time and help! Mike

Agreed! Just for information, I own their EGNV and EFKS and do not have these issues, so I hope that they can make an update to EGJJ soon! I looked for another means to contact them directly, but could only find them on Facebook (of which, I am not a user/member).

Hello! I think the airport and scenery look nice! However, I too noted immediately upon landing (PMDG 737-700) that there is no "Taxi to Gate" option from ATC; just the "basics" per the screenshot attached. When I created a GSX Profile, I noted the gates are all identified as "[none 1]" "[none 2}", etc.. This may also be the problem for other traffic not working in the prior post?? Other scenery developers who have overcome/corrected this "No Taxi to Gate" problem have told me the problem was in Gate naming, sizing, and/or routing routing; but I defer to your expertise, as I have not done any scenery work in years; long before MSFS 2020. I hope you are able to make an update soon to make this nice airport even better! Regards, Mike

Hello iniBuilds! I recently added EGHI to my nearly complete collection of iniBuilds airports for MSFS. I finally "flew in" tonight and upon landing in my PMDG 737, there was no ATC "Taxi to gate" option; just "Taxi to parking" (which only applies to GA), along with the other take options, etc. Can I ask for your help with this? I saw it mentioned above in November of last year, but see no change with the latest version available. I appreciate your help and time! This is a great realism enhancement! Best Regards, Mike Retired 40+ year aviation & MSFS!

Hello! My purchase was direct from iniBuilds. The only time I purchase anything from the in-sim Marketplace is when that is the only option (just a few).

Hello! ! purchased the new airport today and it looks great! Thank you for the new contribution! However, upon landing (PMDG 737), there was no "Taxi to Gate" option, just "Taxi to Parking (GA), Takeoff Options. Ground Services, etc.). All commercial airliners were getting instructions to taxi to General Aviation (GA) parking as well from ATC. I noted the gates all identified as "Ramps" vice "Gates"; not sure if this is a factor. I do understand that other commercial MSFS2020 scenery designers that have had this issue in the past, said they corrected it naming updates (don't know any details outside that) and/of parking sizes. The size looks fine though in this case (I used GSX to select Gate 11 used by DAL). Could I ask for your help with this? It would be great to land and get "Taxi to Gate" for commercial airlines. If I can help in any way, please let me know. Thank you! Best Regards, Mike

Thanks! I will try a reinstall with clean community folder. Best Regards, Mike

I have yet to figure out a way to resolve my issue, but haven't given up. I did notice something; iniBuilds KLAX shows in the "Not Installed" folder of the content manager. I realize that usually doesn't mean anything with 3rd party scenery, but thought I would mention it just in case. Also, since my first post of the issue, I have performed a complete clean install of MSFS and KLAX, but still not change. If I don't run in Admin mode, it's missing most all the taxiway signs and jetways. With Admin mode, everything is there. I'll really puzzled by this one!

Hello! I have an issue with some signs "floating" well above the taxiway (A) going to RWY 07 and wanted to ask if this is something known or perhaps something I can fix? If I can provide any additional info, please let me know. Thank you for any insight, recommendations, or help! Regards, Mike i9-13900K 64GB DDR5-5600 RTX 4090 2TB Samsung 990Pro NVME Dedicated MSFS system Win 11 Pro

Awesome! Thank you for the help & support!

I did try it without Admin on the update, but no luck. Definitely something to do with running as Admin, but I have no clue. Thanks!

No worries! I've had my hands for for the past couple of weeks. When I had time, I kept trying to find a root cause or solution. I tried a lot of suggestions from the MSFS Forum, YouTube, and others. I finally found something that works 95%of the time; running MSFS as "administrator". I saw this in a YouTube post from someone else having the same problem and it made a difference! I cannot explain why; out of my "swim lane"/knowledge range. Any thoughts? Running as administrator not only returned the full jetways every time, but also appeared to "access" much better scenery detail in places; especially ground textures, signs, taxi lighting, etc. (screenshot attached)! On your question; no, I tried that approach too (waiting, changing camera, changing graphics settings, etc.), with no luck. I appreciate your time and help! If you have any thoughts or insight on how running MSFS as administrator makes a difference, let me know!

Hello! Sorry for the delay; been a very busy time. I am attaching a .pdf of all my in-sim settings to see if that might help. I am continuing to see what might be causing it. Seem worse after a flight of an hour or more. I'm no programmer; just a 39+ year MSFS "simmer" and retired "real life" aviation. Again, appreciate any insight or suggestions! My MSFS Settings.pdf

I will be glad to; pretty much "max" on everything, but will do to be sure I don't overlook anything. I am going to try a manual cache of the LAX area as soon as I have time to see if that might help as well. Thank you for your help!

200! 😁 Having the dedicated system gives me plenty of "room". As a 39+ year MSFS "simmer" and real life aviation guy, I aim to get it as "real" as I can! LOL.

Hello! Landed at NFFN today and upon exiting the active, ATC did not present a "Taxi to Gates" option; just Ground Services and Takeoff Options. Can I ask for your help or suggestion? Airport looks GREAT and jetways, etc. all worked perfectly! Thank you!

Hello! I'm looking for help or advice with a challenge I continue to have after the 1.10 update. Spawning & departing I have no issues. Upon arrival however, I have problems with signs not loading and jetways not loading. I have attached departing and arriving screenshots for comparison I am running MSFS on a dedicated PC; i9-13900K, 64GB DDR5-5600 RAM, RTX 4090, and Samsung 990Pro 2TB NVME drives. No other programs run on the system. I am running MSFS at "Ultra" or maximum settings and getting frame rates from 50-130 FPS at KLAX. CPU & GPU usage and temps are low. Any suggestions or thoughts? This is a fantastic airport and it would be great to see it all work upon arrival too. Thank you! Mike

Please disregard! I found the error on my end!

Hello! I updated to 1.01 but continue to see/experience unusable taxiways and runway 23. Before installing the update, I deleted the previous directory from my Community folder and deleted the scenery indexes, content.xml file and rolling cache. Can I ask for help or guidance on how to overcome this? I'm glad to provide any info I can! The airport looks great, but I cannot use it. I have attached screenshots. Also, this is the latest build of MSFS. Regards, Mike