Peter

Most all of us have had similar issues. Currently, my A350 is in the hangar and i have enjoyed flying my Fenix A321 until a couple patches iron the issues out. My suggestion is Be prepared to wait a while. Be patient. How does a fully loaded DAL A321 form Ini's new Klax to Atlanta sound?

would you please send me 1.07? Or show us how to recover it? 1.08 is broken for me.

Unfortunate... I tried 4 flights. All 4 ended in freezes. 1.08 is broken

I dont believe the fuel tank logic is correct - Fuel will burn equally out of all 3 tanks when ALL three tanks are equal amounts. Fuel SHOULD burn from the center until empty. this is because pressure is higher in the Center tank pumps. Then once empty, the pumps in the wing tanks will take over. Typically this is general Airbus logic. Someone correct me if im wrong.

The fuel logic is not correct. The CTR tanks should drain first, then the wing tanks. Im seeing the same issues in 24. Once ALL 3 tanks reach equal amount, the airplane starts burning from all 3 tanks equally instead of burning from the CTR tank ONLY. When you land you have fuel in the CTR tank. If you start with CTR tank fuel LESS than the outer tanks, The center will NOT burn fuel at all.

Thats correct. It shuld be working.

mines working fine. Start with the GPU on state

Should we clear our WASM folder every time after an update?

I enter in the wieghts, al three boxes. Then I can enter in The step alts, and update the winds after.

Yeah I noticed this too.

Also Im not sure the fuel burn logic is correct. I believe the plane is suppose to burn all the fuel from the CTR before burning from Outer tanks. However, this is not happening. What is happening is when the plane reaches equal amounts in all 3 tanks, it starts to burn out of all 3, instead of CTR tank until empty.

I read in an early post that an update is in the works to fix this issue. I would imagine a VNAV rework is in the making....

35,000Lbs of fuel left and all three tanks are equal amounts, and burning from all three tanks?? Shouldnt the A350 burn all the center fuel BEFORE it burns from the outer tanks?

Im not seeing that on my end. Im on SU2. Getting 50 on the ground and 80 in the skies

Unable to enter coordinates and other stuff in the oceanic clearance page. Is this not modeled?

How do i fix if that happens? I now have a community folder within the community folder...but it only reads from the empty folder

I noticed this to, however im only seeing it in the 24 version. 20 works properly

After the update ( 1.5) when i press the autopilot dico TWICE on my joystick, it will give me a red warning on the ecam that it has diconnected. the second click is suppose to aviod this from happening. it does NOT happen in the 20 version. I noticed " kip on the ground" streamer also had the same problem on his appraoch as well.

After the update ( 1.5) when i press the autopilot dico TWICE on my joystick, it will give me a red warning on the ecam that it has diconnected. the second click is suppose to aviod this from happening. it does NOT happen in the 20 version. EDIT: dual post. Mods please delete

Thats a new feature...Airbus has the " no landing gear " option for operators to save costs....

I noticed it does not do this on the 24 version..

It was working, but not properly, so they disabled it. Hopefully they will implement it properly....

This happened to me as well. In my situation.... Vectors to LOC( FAF) EGPH . Direct to FAF, Insert tmpy, plane nose dive flipped upside down and crashed. Autopilot was on, in HDG. As soon as it went to NAV is when it lost control. Peter O

Cant wait to fly the beluga. Brilliant of you guys to do this add-on. Something unique and rare( like Concorde for example) is what this hobby is thirsting for! Peter Osborn