General Discussion

Hi lads, Hope you all had a tolerable Monday. For quite a while now, well over a year to be precise, myself and many others have repeatedly inquired about new liveries being made available in the MSFS Marketplace. Obviously the A350 has seen the most requests, but the A300, A340, TriStar and even recently the A380, have seen many people asking if and when they can expect new liveries being added to the existing packs, or even new packs being made available. Yet, as pressing as this issue is for practically all console users, it gets little to no attention. ‘I’ll pass it along to the team’, is most likely the reaction any inquiry will get. That really begs the question…

Hi iniBuilds Team, I would like to formally request FYWH - Hosea Kutako International Airport, serving Windhoek, Namibia. Why FYWH would be a great fit for iniBuilds: Major Gap in Africa: Southern Africa is massively underserved. FYWH is the main international gateway to Namibia, one of the most stunning countries for VFR and bush flying. Perfect for your fleet: It's a real-world destination for Eurowings Discover A330, Qatar Airways, Ethiopian, TAAG, and Airlink - all aircraft you develop. Ideal for long-haul A330/A350/A380 operations. Interesting Airport: Single 4532m runway at 5,640ft elevation with a challenging high-altitude performance factor, modern terminal with r…

Hi, im new here. My first forum message. I just purchsed the OMDB V2 scenary but for some reason my jetways are unable to connect to the aircraft via GSX. I tired using direct GSX and via aircraft Tablet but to no avail. Am i missing something or is there a bug. Thank you

Hi Team Unfortunately the A380 on Xbox hasn’t been the best for me so far, if I’m not getting the memory low notification my frame rate is awful, probably about 10fps whilst ok the ground, on takeoff and landing. The ground textures also become very blurry which really ruins immersion. I’ve posted a similar post to this about the memory low message a few days ago and have followed the same steps since then, which were, disabling all other addons not being used, downloading the aircraft and other relevant addons, turning all online settings to low and off, photogrammetry off, rolling cache 120gb, performance mode on, FX performance mode on, loaded the aircraft onto the run…

Hi, So i had this issue at some point, where when i requested flight plan init, it basically didn't load the flight plan but only filled out the company route but stayed in yellow text, i dont know if this is normal but i was then unable to execute my flight. I also tried to enter data manually, the only places i cant put anything in is in the departure and arrival airport. I have already restarted everything, including deleted caches, reinstalled the aircraft, deleted WASM and the 350 folder manually from the community folder. I also do realistic flights, so the whole being at a gate thing cold and dark is my default. I am just wondering if you guys know anything about t…

Hi all. New to the forum. I am wondering if there is'a downloadable PDF/files of some kind regarding the A350 setup etc.. I know there are a tonn of Youtube videos but thought it would be nice with a printable version. I have searched the forum without success. Cheers in advance.

When will the A380, A350 and A340 be coming to PS5? 😭❤️ I’m a huge iniBuilds Airbus fan and would buy all three on day one! Xbox already has some of them, so I’m really hoping PS5 gets them soon. Any news? 🙏✈️

Please note that in the PFD the localiser and glideslope are capturedIls Not Aligned To Runway.mp4 but aircraft not aligned to runway

I have tried several times when I launched the A380 from saved games and on approach I am unable to capture the localiser or glideslope. Both remains inactive.

Hello ini team, first off I just want to say THANK YOU in advance and I'm surprised there hasn't be a thread made about this yet. Bizjets hold a very special place in my heart. I've been a ramp supervisor at one of the busiest FBO's in Los Angeles and have the pleasure to work with them daily. Been working the line going on 16 years now. I've been simming for even longer. Every day I'd always say to myself "I wish we can get a good Global or long range biz jet in our sims" and it looks like this dream is becoming a reality thanks to you all. With the amazing track record you've built for yourselves I expect this to be incredible. From what I've been seeing the community…

So when attempting to import the flight plan on the A321 NEO and A320 NEO it just doesn't want to load and it says that i have to enter my Simbrief ID, which I do but then when i try to load it, it says the exact same thing is it a glitch or do i have to do some thing different because my ID does show up like it is written there but it does not show up. Also I did the exact thing on the A330 and everything worked just fine.

Is anyone else experiencing issues with jetways after updating the scenery through the Marketplace? It seems that for sceneries supporting the iniBuilds multi-jetway system, none of the jetways are functioning at all (whether single or multi-jetways)—whether using the EFB or the default ATC option. While I know multi-jetways aren't currently supported on Xbox and cloud gaming, I am unable to use even the single jetways at these airports (such as OMDB, EGLL, and VHHH).

any advise on how to solve this. Have done WASM clean up and deinstall and reinstall on the MFS2020 marketplace.

As the title states, cars in the DXB T3 drop-off area are floating. This comes after a clean-slate reinstall where I disabled it, uninstalled, then re-installed, so I’m not sure what else to do. I tried loading in with different aircraft, such as a base Cessna 172 to see if the aircraft type (and heaviness on the Xbox’s VRAM) would change something, but i got the same result no matter the aircraft. Other than that, the V2 Update is awesome and the level of detail achieved, even while being better on performance, is very impressive, so thank you!

When I adjust the barometer as shown in the video, I experience a brief stutter or freeze. This issue occurs regardless of whether I am on the ground or at cruising altitude. I have tried almost every basic troubleshooting method, including reinstalling the aircraft and other general fixes, except for completely formatting my PC or removing all of my add-ons. However, the issue continues to occur, with spikes in MainThread and other performance metrics. This problem does not occur with any other aircraft and only happens with the iniBuilds A350. It has been extremely frustrating. I even tested it after completely closing all external programs running on my computer, but t…

After V1.0.1 release notes said stuttering should disappear but if not to let you guys know. Seem to have few more stutters on the ground than I used to but less stutters when moving around the flight deck. CPU is Ryzen 9 9950X3D GPU 5090. Do I need to re compile WASM maybe?

Hi Team I just wanted to say thank you for this amazing aircraft, however I am very frustrated at the moment as I was planning my first long haul flight from Dubai to New York. After over an hour of prep I was about to line up on the runway when I got the notification, Memory resources running low, disabling avionics for performance. I tried everything before the flight to ensure nothing went wrong, such as, disabling all other addons and downloading only what was required, turned all online settings off, set rolling cache to 120gb, cleared the rolling cache before all of this, loaded onto the runway for 20 minutes to let the WASM compile, exited the sim and power cycled …

Hi guys. I bought this awesome A380 three days ago. Haven't had time to check it out until today. Three r3asons for this post; 1.First thing should be the Mappings. Any guide available on the mappings/bings for Xbox Controller,Mouse and Keyboard will be much appreciated. This is the only hardware I have. 2.Liveries only two; IniBuilds one and a White one. How come? I thought a liveries pack is part of the buy,right? 3.Is there anything else appart from mappings I need to do before flying this plane? Sim settings/changes ecetera? Thank you. Christy.

Hi everyone ! I've just bought the 350 but i have a sound issue, in MSFS 2024, the MASTER WARNING lights up, but the chime is not audible (FIRE TEST, CONFIG PARK BRK at TOGA). The AP disconnect sound works fine it's weird, and the FIRE TEST chime works perfectly when I try on the default A320neo. Already tried: all sim volumes at 100, two audio outputs, empty Community folder, clean reinstall with the WASM and rolling cache deleted, no controllers connected. Nothing changed. I'm on steam, and I installed the 350 with inibuild manager Any idea? Thanks!

I bought the A380 through the MSFS 2024 Marketplace. The update offered to the aircraft in the Marketplace took three times to get it right, so I decided to transfer the Order to the IniManager. Took a screenshot from my MSFS 2024 Library as proof of purchase but could not do the Transfer Order in IniManager because the A380 is not among the choices in the dropdown tab to select it. Can you add it. I would much rather manage the aircraft in the IniManager going forward GTE

Timestamp here, the a350 in this trailer looks a bit to close to the a350 v2 So to point out the obvious (I was about to point out the window shades but I realised there is nothing new there) Anyways.. we can see that the engine nacelle or inlet cone is entirely blue, we can compare this to a picture on the product page below, I think we can all notice how it is far less blue than what we see in the official a350 v2 shot and the trailer of this new airport So naturally based off of this I have a question: Will the a350 systems and performance update be scrapped in favour for just releasing the A350 V2? Because honestly I'd prefer it to be like that (and I truly…

Hi Inibuilds team, i can see you are trying to replicate the layout of the chart viewer in the ois from the real ois. i’m curious why you are using a different background color(purple) to the real one and a branding on top right corner when there’s no such as thing on the real one which makes it less immersive. is it because of copyright issue?

Hey team! So glad OMDB v2 is now on the Xbox Marketplace! So far it seems promising and performance seems much better than V1! I just wanted to let you guys know that there is a little bit of level of detail in the interior that is missing, just like in v1. The only missing items that I’ve seen is missing chairs in the terminals. The static people seem to be sitting on air. This is seen throughout the entire airport and really ruins immersion. This bug is also seen on your London Heathrow airport. However, other than that, the airport is highly detailed and I know that I’m going to enjoy flying out of here! Thanks!

Would like to ask what this is? As the FAQ still hasn't been updated to tell us how to use our own announcement packs? Or is this just a feature coming soon which would be a bit odd

I know I know, the 330 is technically an Asobo product but are there any plans to improve the 330? While it has come some way since the release of 2024, it would be great to see it get some much needed love especially around the flight model and landing gear contact points