Honeycomb Bravo Throttle Quadrant

[ipaolosan]

Hello,

I'm having problems with throttle calibration using bravo. When the throttles are in idle I have the reverse activated?

Any suggestion to solve this issue?

Regards

Paolo

[iniBuilds]

Have you followed the FAQ instructions?

 

[iniBuilds]

Some people have cycled YES/NO and back to intended setting and it has worked

[Flo]

Hello,

Same issue with the Bravo Throttle. I've red the FAQ for calibration.
I don't use reverse on throttle axis, it is set and calibrated, but the plane throttle won't move until the bravo throttle are like half pushed...

I guess it is the same issue that the one you stated with TCA ?
Could you please confirm Bravo Throttle will also be adressed on code fix ?

Thank you 🙂

Edited November 12, 2022 by Flo

[Flo]

Actually it might not be the same issue as TCA because in my case reverse_on_axis = false. So can't use the bypass code.

[vin747]

same problem here.. i need to push bravo throttles to 50% to get it to come out of IDLE.. 

workaround i've done so far is move neutral axis from 0% to 100% in controller settings.. somewhat helps..

but we need a fix from inibuilds..

[ipaolosan]

I’ve found a workaround, selecting no reverse thrust on EFB, then calibrating the throttle levers it works.

[jimimac]

Hi I am having the same problem with the velocity one will a fix be made available,until then I use the keyboard f2 and f1 buttons.

thanks