Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to - Direct To (DIR TO) a waypoint via the RTE page or ND

Featured Replies

  • Staff

HowTo_DirectTo.png

On the iniBuilds Global Jet you can add a Direct-To on your planned route via the FMS ROUTE Page & or the MFW MAP directly.

Using the MFW MAP / PLAN Graphic Task Menu (Fastest Method)

  1. Hover your cursor over your desired downstream waypoint, navaid, or airport directly on the MFW MAP or PLAN display.

  2. Select the object by clicking it (or using the trackball on the Cursor Control Panel / pressing ENTER on the MKP).

  3. Select DIRECT TO... (D->...) from the drop-down menu that appears on the pop-up graphic Task Menu for the Fix .

  4. Confirm the new routing previewed on the map as a dashed line.

  5. Finalize the route change by pressing the EXEC key on the MKP or click the EXEC soft key at the bottom of the display.

Note: You can Direct-To an arbitrary point in space

To do so

  • Move the cursor over an empty area of the map and select it.

  • This opens the Latitude/Longitude Task Menu displaying those coordinates in the title bar.

  • Select DIRECT TO (D->) and press EXEC to fly direct to that custom lat/lon point.

Using the ROUTE / FPLN SETUP Window

  1. Open the M menu and select FMS, or press the ROUTE / FMS Quick Access Key on the MKP to open the FPLN SETUP or ROUTE page.

  2. Copy the desired waypoint into your MKP scratchpad (or type the waypoint identifier manually into the scratchpad).

  3. Place your cursor over the DIRECT TO field (on the FPLN SETUP page) and press ENTER.
    OR
    On the ROUTE - ACT LEGS page, click your desired downstream waypoint to open its task menu, then select DIRECT TO.

  4. Press EXEC on the MKP or display to activate the change.

Note: Flight plan re-sequencing works differently to the DIREC TO function.

If you try to paste a waypoint directly over an existing waypoint on a TO line, it will insert it before or after the fix rather than going direct. Always use the DIRECT TO field or the waypoint's task menu for that reason.

Using the MKP Quick Access Key

  1. Press the Direct-To (D->) Quick Access Key located on the MKP, directly below the scratchpad.

  2. This immediately opens a DIRECT TO dialog box on the MFW.

  3. Type or select your target waypoint and press EXEC to confirm.

Guest
This topic is now closed to further replies.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.