Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to - Operate Radios - COM / NAV Frequencies, SQWK code, TCAS, and Volume

Featured Replies

  • Staff

HowTo_OperateRadios.png

SYSTEM OVERVIEW

  • CTP – Control Tuning Panels

  • CNS – MFD CNS Page

  • VHF – VHF Communication Radios (COM)

  • NAV – VOR / ILS Navigation Radios

  • ATC/TCAS – Transponder and Traffic Collision Avoidance System

The cockpit has two Control Tuning Panels (CTP). Radios can also be tuned from the "CNS" page on the MFD. Both let you:

  • Tune VHF frequencies (COM radios)

  • Tune VOR and ILS frequencies (NAV radios)

  • Enter the transponder (squawk) code and squawk IDENT

RADIO TUNING - CONTROLS AND INDICATORS

  1. CTP – one on each side of the cockpit

  2. CNS Display under CNS on the DU drop down drop menu

Control Tuning Panel (CTP)

image.png
(Click to enlarge image)

  • VHF1: Shows the active frequency on the left and the preset frequency on the right.

  • NAV1: Shows the active frequency on the left and the preset frequency on the right. (AUTO indicates nav radios are being automatically tuned by the FMS)

  • ATC/TCAS: Shows the squawk code, the transponder mode (STBY), the TCAS display mode (ABOVE/BELOW) and the Aircraft ID.

  • NEXT PAGE: Opens more radios, such as ADF1.

  • TUNE MENU / IDENT / 1/2: The function keys on the right side of the panel.

  • TUNE/DATA: The knob for changing the selected value.

  • BRT / OFF: Display brightness and power.

Note: Press the line select key next to a field to select it. The selected field is shown in a blue box.

MFD Tuning Page (TUNING)
  • VHF1 / VHF2: Active frequency in green, with an editable PRESET field below it.

  • NAV1 / NAV2: Active frequency and station ident (such as 113.50/LIH), with a PRESET field and a DME HOLD checkbox.

  • ATC TCAS: Squawk code, flight ID, and transponder MODE selector.

  • Swap (↕): Swaps the active and preset frequencies.

    FlightSimulator2024_3BDBmwgJp9.png
    (Click to enlarge image)


    The CNS facilitates preset frequencies for both COM and NAV radios. To access the preset menus, click on the VHF1 or NAV1 buttons and follow the screen prompts
    - If available, commonly used frequencies for both departure and arrival airports will be avail to quickly pre-select.

CNS Tuning.gif
(Click to enlarge image)

CHANGING TRANSPONDER CODE / SQUAWKING IDENT - ATC/TCAS

image.png
(Click to enlarge image)

  • Enter Squawk Code: Turn the TUNE/DATA knob (outer and inner) to set the code (for example, 1200 → 1605).

  • Select Mode: Press the right line select key next to the transponder mode. (The mode is shown in a blue box)

  • Change Mode: Turn the TUNE/DATA knob to change the mode (STBY, TA/RA, AUTO).

  • IDENT: Press the IDENT key on the CTP to squawk IDENT when ATC asks for it.

XPDR/TCAS CONTROL PAGE

image.pngimage.png
(Click to enlarge image)

  • Press the ATC/TCAS left line select key again while the code is selected to open the XPDR/TCAS CONTROL page.

    Page 1

    • Squawk Code: The current code, which you can edit with the TUNE/DATA knob.

    • MODE>: Opens the transponder mode selection.

    • TEST: Runs a TCAS self-test. TCAS TEST is shown on the page and on the flight displays during the test.

    • FLT ID: The aircraft flight ID (such as N156QS).

    • ALT LIMIT: Sets the TCAS display altitude band (ABOVE/BELOW).

    • PAGE: Switches between page 1 and page 2.

    • RETURN: Goes back to the main CTP page.

    • ADC1: Shows the altitude source and the current pressure altitude.

    Page 2

    • XPDR1 / XPDR2: Selects the active transponder.

    • ALT TAG: Sets the TCAS altitude tag display (REL shown).

    • TRAFFIC: Turns the traffic display ON or off.

    • PAGE: Goes back to page 1.

    • RETURN: Goes back to the main CTP page.

Guest
This topic is now closed to further replies.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.