Couple bugs I found

Dear inibuilds team,

I'm very happy with the A350 simulation in FS2024, however I have found a few bugs while operating it. I hope you can address them when possible:

-Loaded ILS app 04R into KEWR, pressed direct to GRITY and the depiction on the ND showed the aircraft was going to Overfly the fix. I selected GRITY and pressed overfly in the dropdown menu, and now it was correctly cutting the corner (not overflying) but the overfly triangle was being shown on the FPLN page. Overfly function seems to be reversed.

-When flying a RNP-AR approach like RNP 13L into JFK, in order to see the green "bricks" (LDEV / VDEV) you need to press LS button on inibuilds. On the real jet you don't select LS for RNP approaches. Also LDEV never showed, only the vertical VDEV.

-Opening the ABN non senses procedures (for example EMER EVAC) you can activate it but then the tick button doesnt work anymore. Being unable to answer the question of EVAC REQUIRED yes or no? You end up stuck without being able to select a choice.

-Rollout mode didn't seem to work on an autoland.

Suggestions / Improvements:

-Idle descent profile seems to be exagerated (very steep). On the real airplane we calculate ALT x 4 for distance to go. On this one you could easily descend with ALT x 3 which is unrealistic. Even at idle, with open descent and 280-300kts on the real plane you wouldnt see more than 2500ft/min, with inibuilds it descends at 3500+ ft/min. Please fix the idle performance so it results in a much shallower descent.

-It would be nice to add a feature to program a failure / situation based on speed, altitude or time. Currently in order to get an engine fire at V1 I have to click manually to activate it.

-Is there a way to edit the checklists? if there is an editable file to change the checklists items we could customize based on the different operators.

Thank you in advance for your help

JP