April 10Apr 10 When operating off of single source of bleed, pack flow should not increase after additional pack flow control valves are opened, but rather decrease. While duct pressure shows a decrease in PSI with additional packs in use, flow is still reversed. Pack flow is also indicating 2000-2500 cfm on the selected pack even when the flow control is set to off, with and without a bleed source present.
April 10Apr 10 Staff Hi, I am taking the images from the discord that were provided in that post, can you if possible record a video of this issue occurring for our team, thank you
April 11Apr 11 Author Also notice: duct pressure higher on #2 than #1 and 3 at the end of the video. Cabin is pressurizing while both outflow valves full open/entry door is open. System is far too sensitive in some areas, yet not enough in others (such as when removing bleed source, the leak rate is far too low. These aren't air tight systems)
April 16Apr 16 Author From my testing these values have been reversed as expected with the 1.0.2 update. However, bleed and pack temps are still off and will be making a new thread shortly.
April 16Apr 16 Staff 2 hours ago, Swagger897 said: From my testing these values have been reversed as expected with the 1.0.2 update. However, bleed and pack temps are still off and will be making a new thread shortly. No need to make a new thread, the item is still being worked on
Create an account or sign in to comment