Unable to taxi and steer properly.

[Rusty Dog]

All my other planes (Fenix/PMDG/iniBuilds) are fine and work perfectly the steering and throttle.  

The Tristar is giving me grief. 
I need around 50-60% throttle to get the plane moving.  When its gets doing and picks up speed over 20knots, I have to back off the throttle a tiny bit and it's enough to decelerate the plane to an eventual stop.  It's like the brakes are stuck on (they are not of course).

Then comes the steering. I don't really have any.  
I am using a Virpil joystick with twist feature for the rudder (I don't have pedals). Again it's fine for every other aircraft I own.
On the Tristar, when I try to turn a corner when taxiing, it will start to turn then just turnes back and goes straight on.  
Whe nose wheel is turning too much too fast.   But even when I try to be gentle with it, it will begin to steer into corner then the plane loses speed and comes to a stop again.  
It was impossible and I had to use a 3rd part tool to turn the aircraft on it's axis instead (MDAdjuster).   

You can see it happenening here....
https://www.youtube.com/live/jK42T1ngxKU?si=NJJ9Iho1Oc8EHEM-&t=6825

 

[IniJamir]

Hi, was your binding set to Rudder Axis or the Nosewheel Steering Axis?

[Rusty Dog]

I believe Rudder Axis

Edited 2 hours ago by Rusty Dog