I realized that there's an issue with the iniBuilds A330-200 RR (haven't tried other models yet), that after pushback with GSX, it refuses to taxi. I use a seperate axis for my tiller and brakes, although decoupling rudder/tiller doesn't seem to fix the issue, same for the PEDAL DISC button on the tiller itself.. This happens after the message "NW STRG DISC" appears during wheel lock and continues after "NW STRG DISC" goes away, along with wheel is unlocked and by-pass pin is removed. After that

What happens in detail is: 

- Rolling requires really excessive throttle input. Almost up to 50% N1 or 1.1 EPR. 

- Tiller movements are extremely insensitive. Although the nose wheel and the tiller visually shows it's turned.

- Around after 50-LH/RH shown tiller input, the turn completely stops and the aircraft goes the other way around. Basically, if the tiller is turned RH, aircraft starts drifting LH.

 

Has anyone encountered a similar issue? Thanks. 

Edited March 29Mar 29 by oyku68

Same issue here

On 3/29/2026 at 4:53 PM, oyku68 said:

I realized that there's an issue with the iniBuilds A330-200 RR (haven't tried other models yet), that after pushback with GSX, it refuses to taxi. I use a seperate axis for my tiller and brakes, although decoupling rudder/tiller doesn't seem to fix the issue, same for the PEDAL DISC button on the tiller itself.. This happens after the message "NW STRG DISC" appears during wheel lock and continues after "NW STRG DISC" goes away, along with wheel is unlocked and by-pass pin is removed. After that

What happens in detail is: 

- Rolling requires really excessive throttle input. Almost up to 50% N1 or 1.1 EPR. 

- Tiller movements are extremely insensitive. Although the nose wheel and the tiller visually shows it's turned.

- Around after 50-LH/RH shown tiller input, the turn completely stops and the aircraft goes the other way around. Basically, if the tiller is turned RH, aircraft starts drifting LH.

 

Has anyone encountered a similar issue? Thanks. 

turn off damage, the tires for some reason fail using gsx pushback if its towbarless

Hi,

Please see the attached screenshot. Under the Assistance tab within the simulator, ensure the following options have been enabled.

Thanks!