How to - Calibrate my throttles?

[mattY]

Throttle Calibration Page (PFB)

Choose the number of axes that matches your controller setup, then calibrate accordingly

Throttle Calibration Process

Typically the throttle calibration is done in the following order

1. Ensure that Throttle Axis or Throttle Axis 1 to 3 are assigned in the MSFS Control settings.
2. Set desired REVERSERS ON AXIS option
3. Set desired CAPTURE MODE option
4. Move your hardware throttle axis to the capture point you want to define (e.g. REVERSE/IDLE/FULL)
5. Click the SET [POSITION] button on the PFB to define the current position to the position chosen
6. Repeat Steps 4 to 5 for each desired capture point.

Note: If you have issues with the throttle axis, please note that the throttle axis should not be configured using the option labeled "(0 to 100%)" in Settings > Controls.