Hi guys!

First of all I couldnt find a subsection for the A400, so I did not know where to put it and just created this topic over here.

I purchased the A400M via ingame marketplace (MSFS2020) and finally wanted to go for my first flight.

My problem is, that the pitch trim will always go to 45.2° UP and I cant get it to not do this.
I have a binding for trim on my hotas (Up/down button like, no wobbly wheel or something) and I can get it down to the desired 1.5°.
But some minutes later or when I try to take off and set the thrust to TOGA, it immediately jumps back to 45.2°.

Anybody facing the same issue or can help me?
Let me know if you need more information

Edited March 7Mar 7 by zwackelpeter

I figured out what caused the issue and once more the issue sits in front of the PC.

I had a double binding on my elevator trim and the second one was -stupidity incoming- a wobbly wheel on my throttle grip.
Unbinded that, and now everything is fine.

If anybody could tell me whether there is a possibility to turn down sensitivity on rudder/tiller, I'd appreciate that.

During takeoff its hard to not oversteer.

You'd have to adjust your sensitivity in the controller-axis settings, as well as making minimal inputs on the roll. I use my stick as tiller and rudder so it takes some adjusting to.

11 minutes ago, IniJamir said:

You'd have to adjust your sensitivity in the controller-axis settings, as well as making minimal inputs on the roll. I use my stick as tiller and rudder so it takes some adjusting to.

In the EFB or globally in the sim?

Globally in Sim, via the Settings and Controls menus, then click the gear icons on the hardware you want to adjust

I am on 2020.

However, I know how to set it, 
I was just hoping I do not have to give it a seperate profile and there would be an option in the efb.

Anyway, thank you very much for your help!! 🙂