RideFast Posted Wednesday at 11:22 PM Posted Wednesday at 11:22 PM Oil Level and Press are lit. Engine won't go. Wiki talked about pushing the ELT switch in the cabin. Can't find it. Also tried to open oil door by toggling the intercom switch. That just toggles the intercom, doesn't open oil door. Just pressing on the oil door outside view doesn't do anything. This is frustrating. I don't want to mess with all this engine stuff. Just want to fly. Why doesn't setting engine Realism off disable all this stuff? Please help.
IniJamir Posted yesterday at 12:04 AM Posted yesterday at 12:04 AM Hi, Sorry for the inconvenience you seem to have run into with this aircraft. Whilst the Flyboy Sim RANS S6S Coyote II is sold on the Inibuilds store, ultimately the developmental decisions lie with Flyboy Simulations and as a result, we have no say over how and what the engine settings control or how much realism is controlled outright. These concerns would have to be brought up with the developer themselves but if the aircraft was built with this level of sophistication in mind with engine management, than that's just the way it was designed and we have no control here at Inibuilds. Thank you for understanding and once again sorry for the inability to directly assist your concerns.
RideFast Posted 13 hours ago Author Posted 13 hours ago So do you know how to add oil? The model is unusable until I add oil.
IniJamir Posted 13 hours ago Posted 13 hours ago Hi, sorry at this time I do not know how to add oil as I have never used this aircraft. It's possible someone on YouTube might have flown this aircraft and might have done an in-depth look at the systems but I unfortunately do not possess this knowledge. I am sorry I am unable to assist further.
Recommended Posts