Paddle Posted Sunday at 09:50 PM Posted Sunday at 09:50 PM (edited) Hi all, After pushback the plane(A350) is not moving at all. Parking brake is off, chocks are removed. I am using the airbus thrustmaster without any pedals. I also removed every keybinding related to brakes (just to check). It is still not able to move forward. Do you know how to solve that? Many thanks in advance and fly safe! Edited Sunday at 09:56 PM by Paddle
Transair Posted Sunday at 10:31 PM Posted Sunday at 10:31 PM ok...just a long shot. Using GSX sometimes causes this, and all that needs to be done is to stop Coutl. OK in your case. Does the thrust increase if you power up?
Paddle Posted Sunday at 10:41 PM Author Posted Sunday at 10:41 PM Yes it does. I have flown other Airbus Aircrafts like the Fenix A320 without any Problems. The Hotas is configured and I also did the configuration within the aircraft. Everything else is working with the Hotas.
Transair Posted Sunday at 10:46 PM Posted Sunday at 10:46 PM maybe some connection with the TM. I had this with the TCA which went berserk flying the 350. So I disconnected the USB, then re-connected, and into a different port. No trouble ever since - poss dirty/poor connection. try that..
IniSteve Posted Sunday at 11:41 PM Posted Sunday at 11:41 PM Do you have any other bindings setup to toggle parking brake or a keyboard profile that might be causing a conflict?
Paddle Posted 10 hours ago Author Posted 10 hours ago (edited) Guys, I think I have solved it. I found a video (unfortunatley in french but thank you Youtube for Translation). Essentially you have to map an axis to the brake Axis 1 & 2, then delete any other Brake Inputs beside one you want to use for breaks. After doing this, the plane finally moves. What a nightmare... Edited 10 hours ago by Paddle
IniSteve Posted 9 hours ago Posted 9 hours ago Glad you got it sorted out. We've issues can often be something you haven't had to consider in previous simulators.
Recommended Posts