Problem with the A350

[Evgeniy0709]

Good afternoon. I'm having a problem with the A350. When connecting to the symbrief, I enter my profile ID. Then, when I try to pull up the flight plan from the symbrief, it shows an incorrect ID. Even though the navigraph maps on the plane's tablet work.

Edited November 10, 2025 by Evgeniy0709

[Eddie]

Hello,

Try clearing your WASM folder. Guide here: 
FS24: https://forum.inibuilds.com/topic/24917-how-to-clear-the-wasm-folder/
FS20: https://forum.inibuilds.com/topic/24996-how-to-clear-the-wasm-folder/

Let me know if it works afterwards. 🙂

 

[Evgeniy0709]

3 hours ago, Eddie said:

Привет,

Попробуйте очистить папку WASM. Инструкция здесь: 
FS24:  https://forum.inibuilds.com/topic/24917-how-to-clear-the-wasm-folder/
FS20:  https://forum.inibuilds.com/topic/24996-how-to-clear-the-wasm-folder/

Дайте мне знать, если потом получится. 🙂

 

Thanks but nothing helped

[Evgeniy0709]

Are there any other ways to solve this problem?

 

[Evgeniy0709]

3 hours ago, Evgeniy0709 said:

Thanks but nothing helped

Are there any other ways to solve this problem?

[frank_m]

You entered the Pilot ID or the Username? There is a difference at Simbrief. You have to enter the pilot ID.

[Eddie]

Please confirm if the above helps @Evgeniy0709 🙂

[Big Fat Dave]

I've had similar but it also tells me the flightplan is for a B738 and when I try loading the company flightplan it loads a RyanAir flightplan - that's where the reference to either comes from other than that, all my parameters are correct, ID etc....I am presently tearing my hair out!!