Problem with the A350

[Evgeniy0709]

Good afternoon. I'm having a problem with the A350. When connecting to the symbrief, I enter my profile ID. Then, when I try to pull up the flight plan from the symbrief, it shows an incorrect ID. Even though the navigraph maps on the plane's tablet work.

Edited November 10 by Evgeniy0709

[Eddie]

Hello,

Try clearing your WASM folder. Guide here: 
FS24: https://forum.inibuilds.com/topic/24917-how-to-clear-the-wasm-folder/
FS20: https://forum.inibuilds.com/topic/24996-how-to-clear-the-wasm-folder/

Let me know if it works afterwards. 🙂

 

[Evgeniy0709]

3 hours ago, Eddie said:

Привет,

Попробуйте очистить папку WASM. Инструкция здесь: 
FS24:  https://forum.inibuilds.com/topic/24917-how-to-clear-the-wasm-folder/
FS20:  https://forum.inibuilds.com/topic/24996-how-to-clear-the-wasm-folder/

Дайте мне знать, если потом получится. 🙂

 

Thanks but nothing helped

[Evgeniy0709]

Are there any other ways to solve this problem?

 

[Evgeniy0709]

3 hours ago, Evgeniy0709 said:

Thanks but nothing helped

Are there any other ways to solve this problem?

[frank_m]

You entered the Pilot ID or the Username? There is a difference at Simbrief. You have to enter the pilot ID.

[Eddie]

Please confirm if the above helps @Evgeniy0709 🙂