WASM Crash Report

[Donald Douglas]

WASM: Error during FMGS_gauge_update execution. Error code : 0xc0000005

 

Stopped short of runway, set parking brake, turned off taxi and turnoff lights, then about 1 minute later released parking brake, turned on turnoff and taxi/TO, strobe, wing, and landing lights-- noticed no lights and realized was WASM crash.

 

A340 EIS 1 Passenger

FS2024

Navigraph Navdata

 

OFP attached except was modified to runway 33L TORK1C departure

 

Specs: Ryzen 7 5800XCD, Nvidia RTX4070 Ti Super, 32GB Ram

No autosave in the directory for this flight.

 

OERKLKPR_PDF_1760296321.pdf

[Donald Douglas]

Just repeated the exact same scenario and had no issue so 🤷‍♂️

[Eddie]

Hello,

This is the unfortunate WASM conundrum; sometimes it crashes but then doesn't even in the exact same conditions. Makes it really hard for us to track down edge-cases such as these. 

I've forwarded the above details to the team regardless and we'll take a look.
Apologies for the inconvenience and enjoy the rest of your flights! 🙂

[Donald Douglas]

I figured, just thought I'd send as much data as I could.  I've only had the one issue so far 🤞

[Alextepl30]

Hello, it's sad to participate in these reports, because the plane was bought to fly, not to test!
I tried to fly this mediocre plane from Baku to Singapore three times, and all attempts failed. This is the most recent one! I'll attach the file! The gist is this: I passed the descent, flew the pattern, and then went into the holding pattern! I tried again to activate the ILS approach to the runway in the FMS, and that was it. The FMS froze, all the buttons were inactive, and the plane went into a nosedive and crashed! This is the kind of crap he wrote me! Why release the plane if it's not ready for this???

[Alextepl30]

UBBBWSSS_PDF_1760510472.pdf

[Alextepl30]

A340 EIS 2 Passenger

FS2024

Navigraph Navdata

Specs: intel 12900k, Nvidia RTX4080, 32GB Ram

No autosave in the directory for this flight

[solodrakban]

A340 EIS 1 Passenger
MSFS 2024
AMD Ryzen 7 7800X3D
32,0 GB RAM
RTX 5070ti 

Crash right after takeoff EKCH 22R GOLG2C while manipulating EFIS NAV to ARC right before waypoint RUBAT
WASM: Error during DisplayManager_gauge_draw execution. Error code : 0xc0000005
WASM: Module vfs://inibuilds-aircraft-a340/SimObjects/Airplanes/inibuilds-a340/attachments/inibuilds/Function_A343_Interior/panel/inibuilds-A340.wasm is now dirty

[Eddie]

On 10/15/2025 at 6:02 PM, Alextepl30 said:

Hello, it's sad to participate in these reports, because the plane was bought to fly, not to test!
I tried to fly this mediocre plane from Baku to Singapore three times, and all attempts failed. This is the most recent one! I'll attach the file! The gist is this: I passed the descent, flew the pattern, and then went into the holding pattern! I tried again to activate the ILS approach to the runway in the FMS, and that was it. The FMS froze, all the buttons were inactive, and the plane went into a nosedive and crashed! This is the kind of crap he wrote me! Why release the plane if it's not ready for this???

Hello,

Please have autosave running so you can attach us a file. It is hard to reproduce it based off of this information alone. Guide on how to use autosave can be found here: 

 

Apologies for the inconvenience.