Crashing 2024

[udidwht]

I have confirmed that using 1.0.1 KLAX is crashing the sim once you zoom down to the aircraft prior to starting flight. The sound will mute sim freezes then shortly thereafter straight to desktop. Removing the add-on and re-enabling the default KLAX resolves the issue. Running the latest stable MSFS 2024 (No beta).

[udidwht]

I've noticed with KLAX installed (default disabled) that when choosing 25L it does not place you at the end of the runway. It places you at 7L 25R Hold. Where it will CTD. This is repeatable. 

Once I remove KLAX Enhanced and re-enable the default KLAX it will place and start you at the end of 25L

[udidwht]

Also ran the following commands (w/admin rights) and all completed successfully and without error/s. In the following order:

Dism.exe /online /Cleanup-Image /checkhealth

Dism.exe /online /Cleanup-Image /scanhealth

Dism.exe /online /Cleanup-Image /Restorehealth

sfc /scannow

Dism.exe /Online /Cleanup-Image /AnalyzeComponentStore

Dism.exe /Online /Cleanup-Image /StartComponentCleanup

RESTARTED computer as the last step.

[Rob Ainscough]

Having the same issue, but not just at 25L.  RAM and VRAM are fine.

So far only solution is to disable/uninstall KLAX 1.0.1

I'm removing some of the scenery options to see if that helps.

[udidwht]

It seems it may be the sim itself. Had several successful flights without KLAX but then started getting CTD again but intermittent. 2020 runs perfectly. Also running the latest NVIDIA drivers as well without the NVIDIA app.

[Rob Ainscough]

I unchecked all the optional features and still CTD.  It is pretty heavy on VRAM, around 27GB used (on this PC I’m using 5090 32GB VRAM and 96GB RAM).

So far an uninstall and using MSFS 2024 default is the only way I can fly in/out of KLAX.  

[Rob Ainscough]

I was mistaken, I didn't uncheck all options, I think I had but there is no save button so assume it's automatically saved and action performed on selection.  I didn't want to give up and I think I've found a work around ... I disabled these 3 options:

Three flights so far and no issues.

Edited August 3 by Rob Ainscough

[udidwht]

I've tested with the add-on KLAX and it's repeatable 100 percent of the time. I then tested without the add-on and with nothing in the community folder and it doesn't CTD nearly as often but will at times. Same results after a clean install as well. System is corrupt free. It's definitely an issue that started after the release of SU2 and likely related to a Windows update or server issue. I also reported on the MS forum: https://www.avsim.com/forums/topic/676657-fyi-ctd-msfs-2024/#comment-5539984

[udidwht]

https://www.avsim.com/forums/topic/676657-fyi-ctd-msfs-2024/

[Eddie]

Hello,

Apologies for the delay. We'll give this a look! 🙂

Thank you 

[udidwht]

48 minutes ago, Eddie said:

Hello,

Apologies for the delay. We'll give this a look! 🙂

Thank you 

Much appreciated, but I have noticed that even without your KLAX installed it will crash but with less frequency.

 

https://forums.flightsimulator.com/t/crash-to-desktop-2024/731903/25

Edited Sunday at 11:25 PM by udidwht

[b757cb]

I am running the latest beta and can confirm LAX is crashing the sim. Both .23 and .24 have had issues. Prior to .23, I never had this issue so my guess its something in the sim. 

[udidwht]

19 hours ago, b757cb said:

I am running the latest beta and can confirm LAX is crashing the sim. Both .23 and .24 have had issues. Prior to .23, I never had this issue so my guess its something in the sim. 

.23 and .24??

[b757cb]

Yes. I started noticing an issue in .23, but didn't think much of it, but tested again after .24 was dropped and was still getting crashes. It is only when I am using live default traffic with AIG/FSLTL models. If I use BATC injector, I get no issues. I have yet to test with AIG injector as they were having some issues on their end in latest betas. 

[udidwht]

8 hours ago, b757cb said:

Yes. I started noticing an issue in .23, but didn't think much of it, but tested again after .24 was dropped and was still getting crashes. It is only when I am using live default traffic with AIG/FSLTL models. If I use BATC injector, I get no issues. I have yet to test with AIG injector as they were having some issues on their end in latest betas. 

Not using either AIG or FSLTL mpdels.