Jump to content

How to fly an SLS approach to LPV minima in the A350?


Recommended Posts

Posted

Flying an SLS approach is not described in the manual, so I'm not sure if I'm doing something wrong here. I tried two approaches, which have LPV minima (one at LFPO, one at EDDH). In both cases, only FLS engaged (for non-precision approaches to LNAV/VNAV) minima. I would have expected to see SLS here for LPV minima.

Is there something specific one has to set up (other than selecting the approach in the FMS) for SLS to work?

I see others had issues with this as well, but I don't see a solution there:

Posted
19 minutes ago, Bianfable said:

Flying an SLS approach is not described in the manual, so I'm not sure if I'm doing something wrong here. I tried two approaches, which have LPV minima (one at LFPO, one at EDDH). In both cases, only FLS engaged (for non-precision approaches to LNAV/VNAV) minima. I would have expected to see SLS here for LPV minima.

Is there something specific one has to set up (other than selecting the approach in the FMS) for SLS to work?

I see others had issues with this as well, but I don't see a solution there:

FLS and SLS are different types of approaches.

Posted

Not sure what you mean by "different types of approaches". Both FLS and SLS can be use to fly an RNP approach. With FLS you can fly down to LNAV/VNAV minima and with SLS down to LPV minima.

Do you mean there should be a different approach selection in the aircraft? All I saw was "ILS05", "RNV05" (what I chose) and "05".

Posted
1 hour ago, Bianfable said:

Not sure what you mean by "different types of approaches". Both FLS and SLS can be use to fly an RNP approach. With FLS you can fly down to LNAV/VNAV minima and with SLS down to LPV minima.

Do you mean there should be a different approach selection in the aircraft? All I saw was "ILS05", "RNV05" (what I chose) and "05".

SLS is a precision approach and functions differently than a FLS approach (non precision approach). Do you have the full Navigraph subscription?

Posted
9 minutes ago, Bianfable said:

Yes, I have Navigraph and I updated the nav data. On FMS Initialization it also shows the current database.

Try with EDDF, in the MCDU it should show RNPxx (SLS) or something like that.

  • Like 1
Posted

OK, I just updated to version 1.1.1 and re-installed Navigraph navdata, now these approaches show up correctly (must have had some wrong config in the previous version). For EDDF e.g. runway 07C it now lists (among others) these approaches:

  • RNVY07C (LPV-SLS)
  • RNVZ07C (LPV-SLS)

When selecting either one, the LS and FREQ/CHAN fields are filled correctly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...