Load with GSX manual Fuel amount.

[Sweeper42]

It would be great if the "Load with GSX" option would read the fuel load you've entered manually on the loadsheet and refuel (or defuel) the plane based off its current Fuel on board..

This way we can enter custom fuel amounts and have nice round numbers for our loadsheets. and still get the refueling truck ground service 🙂

The current behaviour right now reads the simbreif amount and will delete / reset the manually entered "Fuel load" amount back to that value..

[frank_m]

Why not entering the fuel amount in Simbrief?

[Sweeper42]

On 6/10/2025 at 8:39 PM, frank_m said:

Why not entering the fuel amount in Simbrief?

I was gonna comment that there was no way in simbreif to see the block fuel amount prior to generating the route  or atleast non that i knew of as the block fuel amount is auto generated and appears blank:


However on taking a deeper dive into it i see you can use the "calculate and compare" section to see this information before generating the breif..

Whilst this does indeed provide a work-around for the "problem". my suggestion is still "somewhat vaild" as a manually entered fuel load amount should still get priority over the simbreif amount regardless in my opinion..