Hi,

I was departing out of Ibiza rwy 24 with the sid KARBE4E using the navigraph navdata. Shortly after takeoff i noticed the nav wasn't following the flightplan and put direct to the next waypoint. After that I pressed on the autopilot and the following sequence happended:

https://youtu.be/gr1KsY7-BoY?si=juWZvpDX3e5R9IrE

You can see turning on the autopilot causes the nose to go upwards like over 30 degrees.

I also managed to repeat the issue with the autosave file:

https://youtu.be/v3zo4Krkp6A?si=aQecUE7F7kCm0nbU

 

 

1749065426.bin

Had the same issue myself the other day.

Happens to me before I engage AP, but has on one occasion happened just after I engage the AP, similar to your video.

 

Edited June 4, 20251 yr by Liamr685

 

21 minutes ago, Rasseeeeee said:

Hi,

I was departing out of Ibiza rwy 24 with the sid KARBE4E using the navigraph navdata.

1749065426.bin 104.82 kB · 0 downloads

Something appears to be corrupted in your plan/autosave. 
I was able to reproduce the issue when loading your save but when I replanned the routing fresh from C&D there was no turn to the right or stall condition induced.  

Of note was the 430' alt constraint did not auto sequence to the next WP so we'll look into why that happens on certain procedures.

Just now, IniSteve said:

 

Something appears to be corrupted in your plan/autosave. 
I was able to reproduce the issue when loading your save but when I replanned the routing fresh from C&D there was no turn to the right or stall condition induced.  

Of note was the 430' alt constraint did not auto sequence to the next WP so we'll look into why that happens on certain procedures.

As for the altitude constraints, could that also be tied into my nav data issue mentioned here?

 

3 minutes ago, Liamr685 said:

As for the altitude constraints, could that also be tied into my nav data issue mentioned here

 

Possibly, but I'm going to work one problem at a time 🙂