Cruise page pressurisation status/landing altitude

[silentghostx]

Hi team,

Bugs noted 

1) The cruise page pressurisation status remains in Auto even though Manual is selected from overhead panel, same with cabin altitude, remaining in Auto despite Manual selected. The pressurisation page appears to show Manual. 

2) Landing altitude - should be rounded to nearest 50ft of field elevation. Currently this value from what I’ve observed is field elevation rounded to nearest 10ft, then add 50ft. Eg NZAA runway 23 has field elevation of 23ft, should be rounded to 0ft. At the moment it will show 70ft on the Inibuilds (23 rounded to 20, then add 50ft)

 

Cheers,

Chen

[silentghostx]

This picture shows that CAB PRESS MAN is indicated - however the CAB PRESS section on the cruise page remains in AUTO for both CAB ALT and CAB V/S

Both these show that the LDG ELEVN on the CRUISE PAGE IS 540ft, this is incorrect as for this approach (LFBO 14R) - it is 488ft on both the Navigraph charts and 488ft on the OIS Landing Perf page. 

The correct LDG ELEVN on the CAB PRESS section on the CRUISE PAGE should be 500ft (rounded to the nearest 50ft).

Hope this helps to clarify the bugs described above.

[silentghostx]

Checking in to see if this is logged by the team? Thanks

[haza2]

On 5/26/2025 at 11:14 PM, silentghostx said:

Checking in to see if this is logged by the team? Thanks

Yes,

Kindest,

H 

[silentghostx]

Hi @haza2

Thanks to the team for continued improvements!

1st item here is completely resolved - thank you.

Regarding the 2nd item, I don’t think it’s fully fixed. 

After the recent fix everything is rounded UP to the nearest 50ft. 

The correct logic should also include rounding DOWN to the nearest 50ft. 

eg ZSPD 34R being at 12ft elevation, this should round down to 0ft. Similarly WSSS 20R being at 13ft, should also round down to 0ft. At the moment both of these are rounded UP to 50ft on the inibuilds A350.

When the landing elevation is equal or more than 25ft it should round UP 50ft, if it’s under 74ft it should round DOWN to 50ft; above 75ft / below 124ft should be rounded to 100ft and so on..

Thanks,

Chen
 

[silentghostx]

I have no clue what’s going on in v1.1.2…

VHHH 07L has elevation on the charts at 23ft. Now it’s displayed as 100ft on the cruise page Landing Elevation… it should round down to 0ft.