[MSFS 24] A333RR - AP randomly disconnects during "cruise" phase and the aircraft start to "STALL" and crash.

[iv_aviation]

I experienced it few minutes ago. Flight is OCN80/EDDM-KMCO. MCDU - fine, ENG startup - fine, taxiing - fine, take-off - fine, climbing - fine etc. The aircraft is cruising and following the flight plan, heading to the USA. BUT above the UK an AP just disconnects randomly buy itself (I don't know why, because I even turned OFF turbulence at all few months ago and also OFF "crash simulating"), I "escaped" the crash of my flight and an aircraft, but in a few minutes (maybe 20) the situation repeated again and my aircraft crashed due to overloading. The MSFS24 reload that all automatically to my last position but the aircraft continued to fly straight to the ground.
I really don't know what was changed to the aircraft, because I already did lots of flights on "ini" A330 (for example: EDDF-OMDB-EDDF, EDDF-KLAS-EDDF, UUEE-KJFK-UUEE, UUEE-KIAD-UUEE, UUEE-EDDM-UUEE etc.) and now I try "to flight" EDDM-KMCO and have a plan to make a return flight "KMCO-EDDM" using the same aircraft. A330 is my favorite, lovely aircraft especially with "RR Trent" engines. And I see that the development team is working on that aircraft, the team is trying to improve it, to make a fully simulated to the real one.
So please FIX that issue, it's very annoying and make the aircraft is UNUSABLE/UNFLYABLE (unfortunately).

Just the fragment of my situation in the video below. Screenshots are also presented: https://imgur.com/a/AKdplnl

 

[iv_aviation]

iniBuilds,
It isn't really funny at all...
What is happening to your product?
After ~1 hour after that AP disconnecting issue (2 times) my aircraft even decided to stop working or working very strangely... just look at the video

 

[iv_aviation]

[iv_aviation]

Thank you, ini. My time wasted...
https://fly.volanta.app/flights/de57703a-2457-459b-9a33-662804d2dab6

[GimbalAxis]

Hi, I'm just starting to fly the default Inibuilds A330 in MSFS 2024 on PC (MS Store). Having done a few very short flights just to learn how the systems work, I've found that on almost all longer flights, the Auto Pilot, and or the Flight Directors, will spontaneously disconnect, resulting in chaos and it's very difficult to regain control of the plane. 

The first instance, I was simply pausing (in MSFS hitting the keyboard ESC key) to change a Setting. When I resumed flight, it was in a dive. Not starting a dive, it had gone from steady cruise to full dive. The next instanct, also a couple of hours in to the flight, I had been in the exterior camera view looking around, and switching back to cockpit view, the FD and AP were both off and the plane was climbing to a stall. And so on.

Neither was caused by "wind" or "inputs". I fly plenty of long haul flights in the default Boeing, and PMDG Boeing, and other planes. This seems to be unique to the Inibuilds Airbus, unfortunately.