logged VHHX freeze

[SamuraiVolante]

When I select an instrument departure or arrival for VHHX, the plane freeze. The simulator still works and I see animations of knobs and buttons but I every function doesn't work, it's like the plane know the waypoints exist (because there is the list on the flight plan) but after activating the flight plan, everything dies,hope you will get it fixed

 

[haza2]

9 hours ago, SamuraiVolante said:

When I select an instrument departure or arrival for VHHX, the plane freeze. The simulator still works and I see animations of knobs and buttons but I every function doesn't work, it's like the plane know the waypoints exist (because there is the list on the flight plan) but after activating the flight plan, everything dies,hope you will get it fixed

 

Please could you use this link to help report back the issue. Thank you.

[SamuraiVolante]

I have this WASM crash when I select any SID from any runway from Hong Kong Kai Tak (VHHX)

To reproduce

• Load at gate
• Power on aircraft (Battery, GPU)
• Insert Init page data (departure/arrival/cruise level/cost index
• select departure procedure, runway, SID
• activate temporary flightplan
• Systems freeze 

Information

• Aircraft: A350-900 and a350-1000
• Simulator: FS20
• Navdata Method: NAVIGRAPH
• OFP: Not required, happens everytime
• Specs: Ryzen 5500, Radeon RX6650XT, 32GB RAM
• Autosave: unable to provide but 100% success rate in recreating it
• WASM: Exception c000001d CommBus callback in module m426c407212bd1a1a
• WASM: callback execution for event NAVIGRAPH_FunctionResult, in module m426c407212bd1a1a, failed

 

 

 

[SamuraiVolante]

after a second test I only need to select the runway for departure for the crash

 

[haza2]

10 hours ago, SamuraiVolante said:

after a second test I only need to select the runway for departure for the crash

 

Thank you will report back