Inaccurate fuel used figures for ENG 1

[baconsmuggler]

(on V1.0.4)

After a flight time of ~ 4:45h the FU figures for both engines differ significantly:

The FU value for ENG2 is roughly within expected limits but the value for ENG1 is far too low. Apart from 2 IFSD events for less than 1 minute on ENG1 both engines have been simultaneously during the flight.

EDIT:

Cycling the ENG MASTER switch in flight resets the fuel used figure for the engine. (Normal on ground but not in flight)

Edited March 16 by baconsmuggler
new info