March 11, 20251 yr So, first of all I will give you guys a full description. Initially I took off from JFK to HKG and just before reaching 5000ft all the screens froze. I posted here and then I was made aware of the TCAS issue. So I took off again with the TCAS on SBY. The entire 15h I had 0 issues. Then during approach I noticed the ILS frequencies were not matching, but I believe this is not iniBuilds issue. I ended up performing a go around because of another traffic. The initial part went well until I put the autopilot on, where the airplane started aggressively pitching up, entering the protection, pitching down, then up, then down until I take over. Second approach performed ok until the last 200ft where my fps basically dropped below 10fps. Touched down and my reversers again did not work, even after calibrating and recalibrating, OIS showing everything working. Later I noticed the ThrottleData.ini was showing REVERSE ON AXIS = FALSE, even with the option correctly set on the sim. BTV worked as expected, so as I used the reversers via keyboard, by the time I stowed them, all the screen gone again. I was not able to turn any lights off, flaps, nothing. The fps came back to normal but I still had controls of the engines. I will attach the screenshots, this is becoming more and more frustrating. Worth to say that before this 1.0.2 I have NEVER had any issues like that. One more thing to mention, I did clear the WASM folder as instructed and followed step by step the procedure. Aircraft: A350-900 Simulator: FS2020 Navdata Method: NAVIGRAPH OFP: Not related WASM Error: Screen attached Specs: Ryzen 9 7950X, 32gb ram, RTX 4090.
Create an account or sign in to comment