boncuk Posted February 26 Posted February 26 Hey, just reached CRZ altitude and before that everything went fine. All of the displays are frozen now (except EFB) & most of the buttons are not working but still have animations. Any ideas? 5
Sierrafox87 Posted February 26 Posted February 26 Hi, i had the same issue! Everything went fine until i reached cruising altitude. All Displays stopped but i could continue to fly the plane. Had to close the sim… 4
Paperk1te Posted February 26 Posted February 26 I've got similar issue, but my aircraft was frozen since load into the sim. 3
maali9mm Posted February 26 Posted February 26 This just happened to me. MSFS2024 lates beta update Flying EHAM-ENGM both payware airports. Navigraph connected to the plane Happened on approach just reached 10.000 feet, suddenly all screen animations froze, no buttons working or anything. only working was the EFB and could still fly the plane, had and ongoing upwards pitch, had to close the game. I clicked the video button but doesnt seems to be the cause when you also have the problem. A350-900 low texture choice with no cabin and SAS livery. Everything worked fine until this and fps were good. 2
Code21 Posted February 26 Posted February 26 It happens to me too. Just in the Moment the Mode announciator shows ALT* A350-900 MSFS 2024 Beta, Lufthansa Livery, Cabin present 1
kmoberg Posted February 26 Posted February 26 Mine crashed too after messing around with the lower display. WASM seems to have crashed. 2
alex6463 Posted February 26 Posted February 26 Same just happen to me doing a flight from KLAX to KATL using Delta libery. All displays are frozon and AP not doing anything.
Hawke Posted February 26 Posted February 26 Same here, aircraft then stared to dive and then climb and fly in circles. 1
Skycowboy Posted February 26 Posted February 26 The same to me. It happened at GND in EDDH cold&dark, maybe after I activated Simbrief-ID respectively Navigraph. Several times the same. After deleting WASM I was able to enter the cockpit again, but to finish MSFS2024 in the normal way it's not possible anymore, only by task manager. I tried to activate Simbrief/Navigraph again, but freeze after that. No SU1 Beta installed - I know... It's a pitty! Rolf
Hawke Posted February 26 Posted February 26 2 minutes ago, Skycowboy said: The same to me. It happened at GND in EDDH cold&dark, maybe after I activated Simbrief-ID respectively Navigraph. Several times the same. After deleting WASM I was able to enter the cockpit again, but to finish MSFS2024 in the normal way it's not possible anymore, only by task manager. I tried to activate Simbrief/Navigraph again, but freeze after that. No SU1 Beta installed - I know... It's a pitty! Rolf It's happend to me in both 2024 and 2020 now.
kmoberg Posted February 26 Posted February 26 (edited) Happened once again, but this time I think I located the problem. The WASM plugin crashed after I was messing around in the native tablet - the sim froze while using the Navigraph plugin to import the route to the tablet/EFB, froze for a good 10-15 seconds or so. When it resumed, the plugin was crashed and everything was frozen and dead. FS2024, Steam, SU1 installed. Edited February 26 by kmoberg 1
cbt3 Posted February 26 Posted February 26 Same issue just happened to me, FWIW. I was messing around in the KCCU and the interface just froze and buttons became unresponsive. Aircraft was still moving but PFD, MFD, etc all froze as well. MSFS 2024, SU1 Beta, Delta 28 Livery. KMCO -> KDCA, happened during cruise at FL410
CaptainGK777 Posted February 26 Posted February 26 (edited) Hello, same. Did a step climb over the atlantic from FL380 to FL400 - all interfaces froze, no v/s indicating the climb, can't click the MCDUs, knobs turn but don't change anything. Plane's still flying though. Edited February 26 by CaptainGK777
Wrightyboy13 Posted February 26 Posted February 26 Having the same issue. Happened during descent, and like somone mentionned above I had been pressing the video button before I noticed the displays had frozen. 1
Oliver89 Posted February 26 Posted February 26 Sadly the same for me. Was clicking around and all of the sudden the Systems froze, but the plane kept flying normaly... I have hat the Same Issue with the A320V2. I really hope this bug is fixed very soon.............
Powie Posted February 26 Posted February 26 Same for me..... In the moment I entered the LAN26 transition for EDDM. FS2020 !
compflyer Posted February 26 Posted February 26 Happened to me on my first flight during taxi. I lost thrust controls + all displays froze. I'm FS202.
rhpa23 Posted February 26 Posted February 26 (edited) Same issue for me. All screens and animations froze. Only the EFB keeps working. Engine throttles were frozen too. Happen twice: taxing and at cruising. FS24 with lastest SU beta installed and NO Navigraph connected. Edited February 26 by rhpa23
Dumpling Posted February 26 Posted February 26 Experiencing this issue too, happened to me when I selected AFS CP Backup Here is the debug: WASM: Exception c000001d in gauge MFD in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm MSFS 2020
ANTPLANES2020 Posted February 26 Posted February 26 Same to me, happened out of LAX. All screen freeze! Help!
Cygnifick Posted February 27 Posted February 27 Same here, happend a few times (dunno what I did) but the last time I used the Ingame EFB and displays froze after a minute or 5. The Ini EFB does still work when it happens.
ChruutvoLuzi Posted February 27 Posted February 27 Just had it for the first time too, 15 min into the flight. Quite annoying but atleast not 12 hours later into the approach 24 SU1 Beta too
xwind007 Posted February 27 Posted February 27 Same here…..using MSFS2020. I departed KLAX heading for KATL…..i was climbing thru fl260 when i noticed the screens were not reacting to the mouse curser. It was then that i realized the PFD was frozen, as was the MFD. i went thru the flight deck pressing buttons and none of them were reactive. The aircraft continued to fly, although I’m not sure it followed the route as i couldn’t track since everything was frozen. Any advice on how to fix?
Carlos Antunes Posted February 27 Posted February 27 MSFS 2024 SU1 Beta here. This is an old issue from inibuilds, I had the same issue with their A330 a lot of times, and now with the A350... 7800x3D, 32gb ram, rtx 4090
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now