How to - OIS Charts & Enroute Map (Navigraph/LIDO) - Setup & Operation

[richboy2307]

 

You can access your Charts and Enroute Map on the On-board Information System (OIS) display via the 'TERML CHART' and 'ENROUTE' tabs respectively at the bottom of the display.

(Click to enlarge image)

Quote

Note: MSFS 2024 ONLY - You have the additional option to use the LIDO charts for whichever airports it is included in the sim by default. 

To switch Chart source between 'LIDO' and 'NAVIGRAPH' open the OIS Settings page which can be reached via FLT OPS MENU > OPTIONS  > OIS SETTINGS.

(Click to enlarge image)

Connect to Navigraph

First you must connect to your Navigraph account  on the third-party options page which can be reached via FLT OPS MENU > OPTIONS > 3RD PARTY. You can connect by

• Scanning the shown QR Code, OR
• Navigating to https://navigraph.com/code and enter the code shown on the OIS.

(Click to enlarge image)

After you have completed the authentication steps the OIS will update to show the additional 'UPDATE DATA' and 'RESET NAVIGRAPH' options.

(Click to enlarge image)

Terminal Charts

These can be accessed via the 'TERML CHART' tab at the bottom of the display.

At the top left corner you can input any 4-letter Airport ICAO Code to access its chart if there are any available. Once you have imported your Simbrief Flightplan into the OIS FLT OPS STS page, the DEP and ARR fields will be auto-filled. Click on the airport to access the list of available charts.

(Click to enlarge image)

The charts are colour coded by category. You can filter the desired category from the bar at the bottom of the display. Click on a chart name on the list to load it.

You can move the chart around by

• holding down left mouse click and moving the cursor, OR
• navigation arrows at the top right corner of the display

You can also zoom the charts and reset to original zoom via the buttons at the top right corner.

 

You may pin your desired charts to the clipboard by clicking the 'PIN' icon next to charts on the list. You can access your clipboard by pressing the 'PIN' icon from the filter bar at the bottom.

 

You can toggle NIGHT MODE for supported Charts by using the toggle button at the bottom right corner of the screen. 

 

Quote

Note: You can enable the AUTO DAY/NIGHT CHARTS option on the OIS Settings to update this automatically depending on the time of day in the sim. This setting can be accessed via FLT OPS MENU > OPTIONS  > OIS SETTINGS.

Enroute Map

The Enroute Map can be accessed via the 'ENROUTE' tab at the bottom of the display. This allows you to see you current aircraft position, overlaid on a 'Standard' world map.

(Click to enlarge image)

 

Quote

Note: Navigraph Users - you can also use the additional IFR HIGH/LOW , VFR and WORLD maps (in Day/Night modes) on this display by pressing the button on the bottom right corner to toggle through them.

You must complete the CONNECT TO NAVIGRAPH process shown above for these maps to work. 

(Click to enlarge image)