no "clb thr" available

[Eleuth]

After the latest small update from Asobo, the A330 does not have clb thrust available anymore.

I start with flex and after a while the plane is asking for "clb thrust". Normally you take back a bit on the throttle and it goes to clb thrust. And while reaching the right hight it switches to speed.

Now that does not work anymore. It goes from flex to "man thrust" and then to "speed".

 

Anyone know how to repair this. I already recalibrated the throttle a lot of time, but it does not matter. I use a Honeycomb throttle and the MSFS 2024 from the Microsoft store

[Eleuth]

solved!

[jaybird]

I hate it when people do this, if you solved it please share with others.

I have this problem, and I have recalibrated my logitech joystick a couple times. I have tried two different departures, and it's always the same thing, when prompted for climb thrust, i move the throttle to where its been calibrated and .... nothing. 

Clearly its not the hardware, as we are different. I have not compared the 320 yet to see if the issue occurs there as well.

HELP!

[jaybird]

I tried the 320 Neo, it failed in the same way. Next I tried the Neo in 2020 and it works as it should. So this is broken in 2024.... what else is new 🤕

[nathan3219]

12 hours ago, jaybird said:

I tried the 320 Neo, it failed in the same way. Next I tried the Neo in 2020 and it works as it should. So this is broken in 2024.... what else is new 🤕

Make sure your flight directors and also Auto throttle on the FCU is engaged. If so, visibly check your throttles in the sim to confirm they’re in climb position. I ran into this a few days ago and it’s because my auto throttle wasn’t engaged on the FCU. It should engage automatically IIRC as I believe it does in the Fenix but it didn’t for me last flight in the ini 333.

Edited March 1 by nathan3219

[jaybird]

1 hour ago, nathan3219 said:

Make sure your flight directors and also Auto throttle on the FCU is engaged. If so, visibly check your throttles in the sim to confirm they’re in climb position. I ran into this a few days ago and it’s because my auto throttle wasn’t engaged on the FCU. It should engage automatically IIRC as I believe it does in the Fenix but it didn’t for me last flight in the ini 333.

Thanks, appreciate the response, I will try that asap!

 

[jaybird]

1 hour ago, nathan3219 said:

Make sure your flight directors and also Auto throttle on the FCU is engaged. If so, visibly check your throttles in the sim to confirm they’re in climb position. I ran into this a few days ago and it’s because my auto throttle wasn’t engaged on the FCU. It should engage automatically IIRC as I believe it does in the Fenix but it didn’t for me last flight in the ini 333.

You sir, are a gentleman and a scholar 😊 It indeed was the FD, I had to calibrate the throttle again, that was odd, I had done it, but this time it actually latched onto climb thrust when it should have. Such a silly little thing, but one I've never worried about with Airbus and so just overlooked.

Thanks again!!

Jack

[nathan3219]

On 3/1/2025 at 2:50 AM, jaybird said:

You sir, are a gentleman and a scholar 😊 It indeed was the FD, I had to calibrate the throttle again, that was odd, I had done it, but this time it actually latched onto climb thrust when it should have. Such a silly little thing, but one I've never worried about with Airbus and so just overlooked.

Thanks again!!

Jack

Glad to help! :)