Engines not starting after turnaround

[MockingBird Air]

I've encountered this issue multiple times now that when flying to a destination and then preparing everything for your return flight, the engines won´t start. N2 won't go over 29.6% even though the aircraft is configured properly.

[BoeingSpeedbird]

I’ve experienced this. They do eventually start (at least this was my experience), but take far longer than normal cold and dark start time. 

[MockingBird Air]

26 minutes ago, BoeingSpeedbird said:

I’ve experienced this. They do eventually start (at least this was my experience), but take far longer than normal cold and dark start time. 

I waited for about 10 minutes and tried multiple starts. Unfortunately nothing happened.

[BoeingSpeedbird]

2 hours ago, MockingBird Air said:

I waited for about 10 minutes and tried multiple starts. Unfortunately nothing happened.

Engine manual start buttons?

[MockingBird Air]

2 hours ago, BoeingSpeedbird said:

Engine manual start buttons?

actually did not try this, as this should not be necessary on a normal basis but I will try it next time, thanks.

[flywithcptFlp]

Hello, I have the same problem but what I do is i press CTRL+E to automatically start both engines. But be aware that pressing CTRL+E empties your plane, so you have to apply load instant, resets the weights (ZFW/ZFWCG and BLOCK), turns on all the lights. So if you're choosing to go for CTRL+E you have to reconfigure the aircraft a bit. I would love for this problem to be solved... 

[Eddie]

Hello,

Apologies for the late reply. Can any of you please grab me a video when you are attempting engine start on turn-around? May help to see exactly what leads up to it.

Thank you and apologies for the inconvenience 🙂