iniBuilds A300-600R Airliner for MSFS v1.1.2 Released

v1.1.2 of the iniBuilds A300-600R Airliner for MSFS has been released. This update fixes lots of different items from systems, to art, sounds and more! Take a read through another extensive changelog below!

This update can be downloaded via the iniManager.

v1.1.2
LNAV 
Major overall system rewrite to better handle turns into initial fix and SID/STARS and holds.

Systems

New improvements:
1 - bleed PSI should be +/- 30psi during start
2 - LO OIL PRESS should be on at fuel lever on and ECAM oil pressure should be red, until 70PSI (goes out and goes green at 72PSI)
3 - engine generators should come online at 52% N2, not 49%
4 - Overhauled PW start sequence following feedback from real A300 pilot
5 – Optimisations to increase performance
6 - ENG FADEC CHANNEL 1+2  FAULT – ECAM logic [Feedback from real A300 pilot]
7 - Significant improvements to stability with WASM crashes and CTD

Fixes:
Fixed - WASM Crash on SEC-FPLN Deletion/Activation 
Fixed - WASM crash doing right turns
Fixed - WASM Crash on exiting Hold - EGSS ILS04 at ABBOT 
Fixed – WASM crash related to terrain radar 
Fixed - WASM crash when entering ZFW
Fixed - SD Wheel Page - Green/Orange overtemp Arc showing around wrong wheel
Fixed - Engine/APU Fire test logic corrected to match RW flow 
Fixed - N1 Command/TLA Position Needle in wrong position during REV THRUST
Fixed - When on glide aircraft can't be controlled
Fixed - IRS mode and source selectors missing interaction
Fixed - EFB remains off until Ext Power connected
Fixed - If ISOL valves off fuel line is drawn between ctr and outer tanks
Fixed - Showcase camera views
Fixed - Quick views R and L view corrected to 90*
Fixed - 3 max waypoints loading on AIRWAYS
Fixed - ECAM FUEL Page - Right Inner fuel feed line not drawn 
Fixed - Throttle Calibration not working (Throttle input not detected) 
Fixed - TCAS traffic INOP
Fixed - FCU Speed reverts to IAS when cruising in MACH mode once TOC is reached
Fixed - Flight perf feedback – refined overall flight performance
Fixed - Trim wheel missing integral lighting
Fixed - Shutdown Checklist
Fixed - FO Alt gauge OFF flag black pixels
Fixed - FUEL SD page and left ECAM MEMO page updating at different rates
Fixed - Fuel Pred - Pressing Fuel button in flight erases values
Fixed - IRS Alignment logic 
Fixed - Direct to logic – Now allows for direct entry change
Fixed - VNAV Climb logic 
Fixed - FMA/FMGS Logic 
Fixed - MDCU Perf page logic
Fixed - MCDU F-PLN page - END OF F-PLN stuck on L2
Fixed - Trim wheel set to 1.0NU, but when adjusting with key controls it snaps to 0NU
Fixed - Speed targets in FMS don't match what PROF commands
Fixed - TACT Mode logic
Fixed - PROG - FUEL PRED PAGE - Altn airport EFOB showing as "-N<-N"
Fixed – Holds adjusted to follow magnetic course
Fixed - ECAM - TO Mode
Fixed - STBY Horizon lost alignment after landing when the APU on
Fixed - Changing descent winds forecast does not affect T/D prediction | BTG
Fixed - Engine Start Sequence logic
Fixed - ND Config logic
Fixed - ND Display logic
Fixed - MDCU perf page logic
Fixed - FD1 annunciation disappears from PFD
Fixed - FMA modes logic corrected
Fixed - BRK TEMP HIGH ECAM message not clearing when Brake Fan selected
Fixed - MCDU flight plan display
Fixed - Assigning a button to control brakes causes conflicting command
Fixed - Secondary flight plan on the ND should be blue
Fixed - "500" Callout on Takeoff in pax variant
Fixed - Oil temp not rising fast enough
Fixed - FLT CTL page missing title
Fixed - FPLN Page - unable to input Lat/Lon as a fix
Fixed - Erroneous T/D
Fixed - Scrolling through F-Plan should be one wp per arrow press
Fixed - CTD When loading into plane (FLY NOW button)
Fixed - Rudder should still turn nosewheel by 6°
Fixed - MCDU F-PLN page additions and corrections
Fixed - ND Runway length filter for fields under 5000' length (may sometimes return smaller fields based on sim logic)
Fixed - Plane stalls in VS mode when trying to hold a pitch below stall speed. Aircraft will now pitch down
Fixed - Airway L620 not returning fixes on FLT plan page
Fixed -  T/O Perf calc page hPa/inHg tied to WEIGHT UNITS option in settings
Fixed - Weight & Fuel changing mid-flight, then FU bugged and SBY Horizon bugged
Fixed -  Loss of systems after returning from pause
Fixed  -Systems and display freezing - LSGG-LFSB with the LUMEL 8K arrival, ILS Z 15 approach.
Fixed -  CTD - KLAX star ANJLL4 via DNERO transition, ILS 25L via CRCUS
Fixed  -Speedbrakes show as deployed on ECAM on spawn in
Fixed - No Flex temp on TO calcs with PW
Fixed - BUS 1 should be connected to ESS BUS, GEN OVRD should have an arrow [Feedback from real A300 pilot]
Fixed -  Landing distance calculator bug fixed 
Fixed - Elapsed Timer does not show "1" in 10h02m ET
Fixed - Fix landing distance calculator (in current state, the METAR data does not sync)
Fixed - T/o Perf calculator does not mirror altimeter units from settings
Fixed - Eng Fire squib test still shows in Amber
Fixed - [EFB] MTOW discrepancy on TakeOff Perf Calculator
Added – You can now have a custom background on your EFB
Fixed - FMS: Distance to T/D should report actual distance and not distance between last w/p and T/D (distance between last and to should be actual distance, not segment distance between waypoints. [Feedback from real A300 pilot]
Improvement – Overhauled Packs off operations following feedback from real A300 pilot
Fixed  - ILS freq selection: Only ILS freqs should be avail – uneven after “.” E.g.10/15/30/35…) .20/40/60 are not valid ILS freqs [Feedback from real A300 pilot] 
Fixed - ECAM logic on start [Feedback from real A300 pilot]
Fixed -  ECAM Brightness panel labels disappear when IDC Radios selected from EFB
Fixed  - MODE CHG stuck on ND
Fixed  - RMI Gauge VOR bearing/declination issue
Fixed - Eng N1 should show until +/- 1% on shutdown
Fixed - IMM EXIT prompt bug 
Fixed - MCDU: PROG page - cannot return out of ENG OUT mode
Fixed - FCU lights disappearing in flight (daytime)
Fixed - Simbrief weights bugs
Fixed – TOD ETA incorrect 
Fixed - Winds have no effect on INIT B or FUEL PRED page
Fixed - TRIP TIME and fuel burn predictions exaggerated
Fixed  - FACT RWY19 TETAN 1A SID
Fixed - FMS: OPT and MAX FL’s are in steps of FL005 [Feedback from real A300 pilot]

Art

Fixed - All outside animations and cockpit yoke tiller animations running at 5/10 fps
Fixed - Stairs don't spawn on freighter
Fixed - Backpanel  APU EGT, N1 and OIL gauge needles not lit at night
Fixed - EGT warning light on GE engine config lighting up at PW limits
Fixed - Oil QTY bugs animation no longer as smooth as before
Fixed - Hole in rear of GE model (Checked all liveries)
Fixed - FO TERR MODE GPWS decals missing
Fixed - Floating fan blade numbers PW DHL (D-AEAF)
Fixed - D-AEAF red texture line floating when bulk door opened
Fixed - Reversed text on tyres when worn
Fixed - Fuel Pressure Indicator Window missing on liveries
Fixed - [XBOX][ART] Double edge around windows (and no textures)
Fixed - L/R Stairs not showing when selected from EFB

Sounds

Fixed - External airport ambience sound adjustment
Fixed – Various overhauls and minor tweaks 
Fixed - Allow warnings/callouts/alerts volume to be controlled separately
Fixed - Trim “Whooler” sound missing
Fixed - APU external sounds 

EFB

Added can now create a custom background. Instructions here: