A300 FCU lighting Night/Day Flight

[Airbuskid87]

Okay so I am trying to figure out if the plane has a bug or its user error. I can’t seem to get the FCU digits to show up when flying from a night flight to land in the day.

For example I take off at 3am and the FCU worksite see the speed, altitude etc the moment the sun rises I notice it triggers something and the digits disappear. Now if I slide the time slider back and forth in the menu I  still see the digits at night but can’t see them during the day. The anti glare knob is turned all the way up still can’t see the digits am I missing something ? 

[DanDan87]

I have the exact same issue. Not sure what is causing it. 

[richboy2307]

Hi @Airbuskid87 

As reported by @DanDan87 on discord, this issue appears to be related to anti-aliasing settings. Perhaps try to change your settings and see if the issue is resolved. Thanks!

[DanDan87]

Hello - I replied to the post in discord. It is happening again. If you load in at night time and then change to day time, it will break. If you load into the sim at day time it will work but if you go from day to night then back to day, it will break again. So what I thought was an anti aliasing issue is not the case. @richboy2307

[richboy2307]

Hi @DanDan87 / @Airbuskid87

Can you check if you have Aircraft Light assists set to OFF?  (Options > Assistance Options > Aircraft Systems)

Do note, after setting it to OFF, you will need to restart the flight for changes to take effect.

[Airbuskid87]

On 6/5/2024 at 7:30 AM, richboy2307 said:

Hi @DanDan87 / @Airbuskid87

Can you check if you have Aircraft Light assists set to OFF?  (Options > Assistance Options > Aircraft Systems)

Do note, after setting it to OFF, you will need to restart the flight for changes to take effect.

I will check this out tomorrow and report back. Thanks.