V/S Mode

[MD82]

Hello,

when selecting V/S mode and confirming on the FMA. I select V/S 0.0. If I now change the altimeter setting to a new value, and with V/S still active and 0.0, the autopilot will climb/descent to regain the original altitude. In other words, V/S will increase or decrease without pilot input and without a change in the selected V/S to regain an altitude which should not be the case. VS mode at VS 0.0 should be just that if I'm not mistaken. At least it is on all other autopilot systems I know.

[Deleted Account]

Yep, this is a known issue, thanks 🙂