UA124567 Posted January 6 Share Posted January 6 I have noticed that my RMI needles does not work when ADF station has been appropriately tuned. For instance I was making an approach on the ILS runway 27 at East Midlands EGNX, As you descend on glideslope there is a altitude check at locator beacon EME 353.5. I have tuned the locater on my ADF selectors on the pedestal panel however RMI ADF indicator remains flagged, in other words - it does not work. I tried this with other ADF beacons and still that does not work. VORs and ILS work fine. Unless I am doing something wrong. I am on latest inibuilds version however same problem occurred on previous build. Any feedback ? Link to comment Share on other sites More sharing options...
UA124567 Posted January 6 Author Share Posted January 6 Correction NDB beacons not ADFs, my mistake Link to comment Share on other sites More sharing options...
UA124567 Posted January 7 Author Share Posted January 7 Anyone? Do people even use NDBs? Link to comment Share on other sites More sharing options...
Crabby Posted January 7 Share Posted January 7 Very rarely these days. Back in the old days you could tune an NDB into an AM radio station for guidance (If you knew where the antenna was). Most of the time, you will only use an ADF/NDB on an ILS approach that has one associated with the approach, like an in conjunction with the OM. Mark "Crabby" Crabtree AAL311 | PHL I7-9700KF | 2070 Super | Honeycomb Alpha/Bravo | MFG Crosswind Link to comment Share on other sites More sharing options...
ual763 Posted January 7 Share Posted January 7 Yeah, I noticed this too. The ADF needles do not work. Tried over multiple NDBs. Robert Schumacher Link to comment Share on other sites More sharing options...
Deleted Account Posted January 7 Share Posted January 7 Thanks, we will take a look 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts