Hi,

After 1.0.2 update, brakes still not working as they should.

When no hydraulic power accumulator doesn't deplete when cycling the brake pedals.

When parking brake is set, L and R brake indicator show pressure, then when parking brake off needles go to 0, that's normal.

Whn brake switch is in ALTN (ONor OFF) brake pressure should show on L/R needles but it stays at 0, it should only stay at 0 when brake switch is on NORM position.

Also when parking brake OFF and brake switch is ALTN and no pedal pressure applied, needles should show 0 but instaed it shows pressure as if parking brake if ON..

 

This from pax aircraft.

2 hours ago, airifr said:

When parking brake is set, L and R brake indicator show pressure, then when parking brake off needles go to 0, that's normal.

I meant, when brake switch in NORM.

 

 

2 hours ago, airifr said:

Whn brake switch is in ALTN (ONor OFF) brake pressure should show on L/R needles but it stays at 0, it should only stay at 0 when brake switch is on NORM position.

I meant, brake pressure should show when applying pressure on the pedals.

2 hours ago, airifr said:

When no hydraulic power accumulator doesn't deplete when cycling the brake pedals.

I meant, when depressing brake pedals to set parking brake Accu pressure doesn't lower, or when cycling pedals Accu pressure should lower then deplete.

 

16 minutes ago, airifr said:

I meant, brake pressure should show when applying pressure on the pedals.

Disregard that one.

 

iniBuilds, we should be able to delete our posts to correct or edit, not have to reply quote our own post to edit..??