Jump to content

Inibuilds A300 MSFS Plane still dropping out of the skies before touch down


Recommended Posts

Posted

When 20FT appears and try to flare the plane it doesn`t matter in what angle I put the plane but its feeling like its dropping out the skies and the rudders are going everywhere, left, right and is really sensitive

  • Like 2
Posted

I concur. It also happens to me. I've also  noticed that after touch down, it tends to lean to either the left or the right mains, causing me to adjust with aileron input.

It happens no matter the airport or weather conditions.

  • Like 3
Posted

First flight with it and I had to do what you´ve always been told not to do. Input down on the yoke during flare. Otherwise the plane would have floated for ages I feel, just for it to drop when reaching the 5 callout. I have to try to trim the airplane down a bit so the flare happens when reaching the "10" callout. Seems to work, or that I´ve read.

Posted

Had the same issue. Everytime I touchdown, my plane is banking to the side and remains on one maingear for 2-5 seconds. It can also be seen in Emanuels Videos, he had the issue every single landing.

  • Like 1
Posted

I also have the same problem.

Everything seems to be ok on the approach. But during touchdown the airplane behaves very shaky, it always wants to tip to the left or right.

  • Like 1
Guest
This topic is now closed to further replies.
×
×
  • Create New...