Hi There,

I am setting up my controls (Honeycomb A and B, Saitek Radio panel etc) with the spad.next tool. I wonder if you coulf provide a LVARS list so I can set everything up?

Much appreciated it will be.

Thanks,

Roy

Heya!

A look into the FAQ would have given you the answer quicker 😉

 

1 minute ago, gumbyger said:

Heya!

A look into the FAQ would have given you the answer quicker 😉

 

Ha ha ha, thanks. Logical location to find these info.

In Spad.next there are A LOT more LVARS. So I can assume that these LVARS do not work? I would for instance automate the APU start flow.

Edited March 3, 20233 yr by navnak

They will all work, those listed are just the most important ones that most people will use.

1 minute ago, gumbyger said:

They will all work, those listed are just the most important ones that most people will use.

Yes that I understand. But I am not "the most people". So please would you be so kind to provide me the full list? Or at least the APU vars.

I can't, no, as I don't have a more in-depth list. I can ask for the APU LVARs, but it`ll be quicker if you read them out yourself.

Lemme know if you need them still.

Sorry for the late reaction, due to some health issues.

Yes, I would like to have the APU LVARs.

Can you also provide me with the elevator pitch trim settings? Or are these standard MSFS?

Thank you again.

Hi, it would be very helpfull to get the full list as I do not know how to get it .

Any suggestion would be very appreciated

thanks

Pascal

On 3/15/2023 at 11:55 AM, navnak said:

Sorry for the late reaction, due to some health issues.

Yes, I would like to have the APU LVARs.

Can you also provide me with the elevator pitch trim settings? Or are these standard MSFS?

Thank you again.

AN225_APU_LEFT_STARTER_SWITCH and AN225_APU_RIGHT_STARTER_SWITCH are the switches, set to 0 to start APU

AN225_APU_LEFT_START_COMNAND and AN225_APU_RIGHT_START_COMNAND for the actual starting procedure

Do you have the LVAR for :

• VRTCL VEL H3 button ?
• Wind screen wipers?
• the two steering tiller switches?
• battery switches

Please

Pascal

21 hours ago, AEL001 said:

Do you have the LVAR for :

• VRTCL VEL H3 button ?
• Wind screen wipers?
• the two steering tiller switches?
• battery switches

Please

Pascal

• AN225_PITCH_LEVEL_COMMAND (1 = Trigger)
• AN225_WIPER_SWITCH_CPT (0 = OFF, 1 = SLOW, 2 = FAST)
• AN225_WIPER_SWITCH_FO (0 = OFF, 1 = SLOW, 2 = FAST)
• BATT1_SWITCH (0 = AUTO, 1 = OFF, 2 = MANUAL)
• BATT2_SWITCH (0 = AUTO, 1 = OFF, 2 = MANUAL)
• BATT3_SWITCH (0 = AUTO, 1 = OFF, 2 = MANUAL)
• BATT4_SWITCH (0 = AUTO, 1 = OFF, 2 = MANUAL)
• BATT5_SWITCH (0 = AUTO, 1 = OFF, 2 = MANUAL)

The two steering tiller switches are in the other thread.

Thank you Gumbyger ;-))

In the Hardware LVARs list in the FAQ, the NAV and STROBE lights have the same LVAR : AN225_POTENTIOMETER_NAV (LVAR) (0 = Off, 1 = On)

I guess that for STROBEs it is : AN225_POTENTIOMETER_STROBE (LVAR) (0 = Off, 1 = On)

Thanks

Pascal

Hello,

Could you give me the key binding for the H3 button on the autopilot?

Thanks in advance

Pascal

20 hours ago, AEL001 said:

Hello,

Could you give me the key binding for the H3 button on the autopilot?

Thanks in advance

Pascal

AN225_AP_VS_COMMAND

Good day, can you please advice lvar for toggle between 1s and 100s on the Altitude selector?

Thanks!

7 hours ago, Alertelass said:

Good day, can you please advice lvar for toggle between 1s and 100s on the Altitude selector?

Thanks!

AN225_AAW_OPTION_100S

Dear Team, 

please advise an input for the pitch inputs up/dn?

Thank you in advance!

 

I am trying to create a good comprehensive StreamDeck profile for the AN225. I'm having difficulty with the APU starter guards and buttons, and I'm guessing I'm going to run into this with some of the other switches. I've been able to get the stream deck to read the status of the cover and the switch using "(L:__APU_LEFT_START_GUARD_State, Number) 1 == (L:__APU_LEFT_STARTIsPressed, Number) 0 == and" . Clicking it with the mouse makes it update perfectly (with the numbers changed depending on open close, etc. ) so That's coming along great. I cannot get the darn thing to respond to any commands though. Using the developer mode / Behaviors debug I've been able to find most of what I need thus far. What I'm getting for the APU starters is "AIRLINER_APU_LEFT_START_GUARD_Push" and I cannot even get the BehaviorDebug to change the state of the covers and switches. I am stuck. Please help! So far most of what I have working (battery switches, and everything else on the electrical panel) I've been using the BVARs for. Help me Inibuilds-wan Kenobi, you're my only hope.

Using StreamDeck and Lorby Axis&Ohs.

On 3/3/2023 at 8:01 AM, Nico - Gumby said:

I can't, no, as I don't have a more in-depth list. I can ask for the APU LVARs, but it`ll be quicker if you read them out yourself.

Lemme know if you need them still.

Sorry I missed this when I wrote my question yesterday. 

So I'm looking for the following:

APU starter guards, APU start, APU bleeds, APU start INIT guards and switches, Hydraulic pumps guards and switches, Launch cover, Engine mix switches and covers/guards... and I think that's it. Just having a hard time getting them to work with the stream deck. However so far I'm pleased to report that I've got the whole electrical panel worked out! 🙂 Thanks in advance for any help you can give.

Hi!

As @Bigby225 user, I'm trying to build a Streamdeck profile for the AN225. I haven't started with the APU yet. I would like to be able to control External Power, even mixing it with GSX features, but while I can operate the switch through AN225_EXT_PWR_ON LVar, I cannot control (or even read) the GPU availability which is operated through the EFB. I couldn't find a suitable variable and FSUIPC offsets 077A and 077B are not useful in this case.

Any ideas?