Jump to content

CyrilQiu

Member
  • Posts

    6
  • Joined

  • Last visited

Everything posted by CyrilQiu

  1. Hi Thanks for your reply, this is a random event, about 30% probability, I used the GSX push out procedure, when the trailer was connected and I was prompted to release the brakes, I released the parking to remove the wheel chocks and the aircraft drifted forward until the push back started, I will upload the video as soon as possible, thank you
  2. Hi Thanks for your reply, this is a random event, about 30% probability, I used the GSX push out procedure, when the trailer was connected and I was prompted to release the brakes, I released the parking to remove the wheel chocks and the aircraft drifted forward until the push back started, I will upload the video as soon as possible, thank you
  3. Release the parking brake and the machine will drift. Have you ever encountered this situation? How to solve it?
  4. Release the parking brake and the machine will drift. Have you ever encountered this situation? How to solve it?
  5. Hi iniBuilds team, After updating to A350 v1.0.8, I’m experiencing an issue where the EXT1 and EXT2 power switches show "AVAIL" but cannot be clicked to connect external power at certain airports. For example: - **CYYZ** and **YMML**: EXT power works fine. - **NFFN**: EXT1/EXT2 show AVAIL but are unresponsive. This happens under "Cold & Dark" + "ON GPU" panel state. The EFB is operational, and all batteries are ON. Prior to the v1.0.8 update, external power worked at NFFN. I believe this might be caused by changes to the ground power logic, where smaller or default airports might no longer trigger proper GPU detection. It may be worth checking whether the aircraft depends on certain SDK flags in the scenery. Would appreciate if this can be looked into or considered for a hotfix. Thanks!
  6. Hey Guys After today's update, I started the cold storage as usual, but there was no response when I clicked EXT1 and EXT2 even though they were both in the AVAIL state. Has anyone encountered this situation and how to solve it?
×
×
  • Create New...