hu hu
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by hu hu
-
-
Me too. It happens on me at both v11 and v12.
-
iniBuilds A350 1.0.8
MSFS 2024 SU2 1.4.14.0
As the video linked below, if we start a new game from the air1. The default start statuses are incorrect, eg, Flap, Throttle, Spoiler—landing gear, even at high altitude.
2. After fixing the wrong setting above manually, the “CAB PRESSEXCESS CAB ALT” will be displayed on the screen.
If the starting altitude is above 30000 feet, the aeroplane will keep diving and enter “AUTO FEMR DES ENGAGED” mode, and AP can never be engaged; the throttle can not work and “CAB PRESSEXCESS CAB ALT” will be displayed until it hits the ground.
If the starting altitude is around 10000 (landing), the aeroplane can be saved by manual operation and AP can be engaged after saving the plan, but “CAB PRESSEXCESS CAB ALT” will be displayed until landing.
3. The “CAB PRESSEXCESS CAB ALT” only happens when I upgrade to 1.0.8 (Delete 1.0.7 before installing 1.0.8)
Flap open, Throttle idle, Spoiler open, Landing gear down act as same as v1.0.5 to 1.0.7Video link below
-
This happens on 1.0.5, livery iniBuilds FrenchBee, iniBuilds House, and all other iniBuilds livery.
Now the v1.0.8 has fixed this problem.
-
@Eddie
Thank you for your reply.
I found that this problem occurs on both iniBuilds A350 and iniBuilds A300. For PMDG LVFR ASOBO aircraft, everything works fine.
Also, I deleted the A350 and A300 through iniManager.
Reinstall A350, Reinstall A300, and update to the latest version
iniBuilds A350 1.0.8 A300 1.0.4 MSFS 2024 SU2 1.4.14
It's still the same problem
I made a video for this A350 problem. I only reduced the thrust to IDLE no other operations. -
Tried OIS, and this does not work because it shows it is not working while in the air.
I start the free flight from the air and am looking for a play of aircraft landing. -
MSFS 2024 SU2 Beta 1.4.12.0
iniBuilds A350 1.0.7
Go to Free Fly, and start a flight from any runway start point and view from the outside.
You will find the spoiler is opened by default. Which is not correct if it is under the Ready to Takeoff stage.
-
A350-1000 with the same problem
-
MS Market version A350
As the picture below shows, I tested A350-1000 and A350-900 with and without cabin versions. All nose wheel center cover textures are displacement.
A350-900
-
Same problem with v1.0.7
-
3. View from outside
While flying, not only the ground vehicle but also the Wheel chocks can be found (not in this picture).-
1
-
-
2. Play the game and retract the landing gear (Not necessary, but it is good to see the problem)
The ground vehicle will be found outside of right side windows (Flying)
-
MSFS 2024 SU2
Inibuilds A350 1.0.7
1. Start a new free fly game with the arrival point of a runway and departure from anywhere
-
Button ‘CPNY F-PLN REQUEST’
-
-
When I am using iniBuilds A350 1.0.7 with MSFS 2024.
Start the game and enter free-fly model
Whatever starts from the parking lot (Cold&Dark) or starts from the Runway (Ready to take of)
The 'CPNY F-PLN REQUEST' button will become unavailable (Gray) randomly.
In most of cases, after the engine starts or reads the SimBrief file and waits 1-5 minutes, this button will be from available to unavailable.
-
MSFS 2020 latest version
The FMS 1, ACTIVE/INIT
FROM and TO ALTN sections are not able to be edited or changed whether pre-configred or NOT.
To EDIT this section, it is very important to start from the air (WORLD MAP mode), or just the landing model. OR change the destination airport.
This function was working perfectly but has been unavailable since yesterday.
-
7 hours ago, TXjhed said:
I think the answer below is your question. and this is from MSFS forum
“The aircraft you see in My Library is an AI aircraft model for traffic and not the iniBuilds A350. You made the purchase in 2020 via the Marketplace? If so, it’s possible that it isn’t being ported into 2024 that way. If you want the iniBuilds A350 in 2024, I believe you have to purchase it directly from iniBuilds at the moment.“
Ref:
https://forums.flightsimulator.com/t/the-a350-aircraft-model-is-not-usable-in-msfs-2024/708314
It is in the right place in my Community folder.........right?
-
I bought inibuilds A350 about 8 hours ago through MSFS 2020 store.
This A350-900 and A350-1000 shows and can be played under MSFS 2020.
Then I switched to MSFS 2024 (SimUpdate 1 - Flighting 1.3.22.0)
This A350 module shows under My library section and "Streamed" as picture below shows
But
Nothing (NO A350) shows under jet selet interface.
What should I do next for play this module under MSFS 2024?
The ‘Planned Route API (MSFS2024 Only)’ function is NOT working?
in Systems
Posted
I had tried to create a new flight plan using the MS integrated flight plan tool (Both EFB and Flight Planner web).
From the MSFS2024 EFB (Route page), I tried to load from Web, the EFB can get my route correctly, then I use the SEND button (Tried both 'SEND TO ATC AND AVIONICS' and 'SEND TO AVIONICS'), nothing works, my FMS screen gets nothing. still empty 'init page' and 'F-PLN' page. Nothing happened, 'CPNY F-PLN REQUEST' button not working as well.
Did I miss something or do something wrong? Or can I find some GUIDE somewhere?
I saw version 1.0.11 claims that A350 start to support 'send and receive the MSFS2024 integrated flight plan from the sim FMS and vice versa.'
My iniBuilds A350 is 1.0.12
Tried MSFS 2024 SU2 and MSFS 2024 SU3 Beta (all up to date)