YS0430

Burrrrrg, was it? I am so disappointed as I am only flying the -1000 varient and that after I updated the co-pilot is now gone for good, where's the feeling of somebody around?

Tried uninstall the A350 and reinstall it and no luck, the co pilot just disappear for the A350

I updated the A350, del A350 WASM folder, first load in the runway, compliation and system apparently worked, but now the co pilot gone missing????

Hi there I think currently we only have a tail cam and undercarriage cam, which only can see the front landing gear. As I love to do replay in the showcase camera, it would be better to have one more showcase camera to show the main landing gear in the frame also, that is kind of an epic angle for touchdown phase.

Thankyou for the prompt reply, we just pick on these as these are more of a focus when the plane is quite good to begin with, and maybe we are spoiled by the previous MSFS releases. Wish you all can make it from good to great

The engine swirl in the game is kind of an elipsoid on a cone, and during spin it have a very wobbly pattern compared to the youtube IRL ones which is a smooth spiral pattern spinning, could it be fixed in the modelling? I know it's kind of minor issue but since the 3D model is so well built I would hope for this to really improve

Anyone have the issue? whenever I am on approach phase the co-pilot will keep request for destination change to the airport and mess up all ATC messages, it feels really strange, but if I disable the AI ATC, when I am off I will need to do Esc->enable AI ATC and then turn it back off during final, worse still in FS2024 it seems that the assistant tab isnt available on the toolbar?

In the ini manager you can select your community folder location, I put the link of the FS2024 folder into the FS2020 location and install the 2020 version into the 2024 sim, it then worked in the sim but not the 2024. Now after this step I did my second reinstall of the FS2024 (plus all my most used scenery, fenix and FBW) and... bam! the 2024 version loaded!!! first compliation is like 3minutes and finally it worked.

Just to update: Out of distress I tried to map the same community folder of the FS2024 into the ini manager FS2020 folder, and try once loading the A350 (2020 ver) and bam, that version worked... although no cabin or co pilot...

Update from the official direct support, they can't figure it out why this happens and is asking asobo, and they agree that it is very strange that thei default A320Neo V2 runs perfectly (first load 15sec), and the A350 just cannot load. will wait and see.

I didn't alter anything in dev mode and that's the weird part, fun fact is that the asobo inibuild coporation A320 neo just worked, and first load also <30sec.

I try starting at the gate first, but since it cannot start any battery and external walk around I am able to find the GPU connection cover, open-> and GPU appears, shift+C into the cockpit the ext power button is lit up but nothing else work, contacted support and they told me to try start at runway to force WASM compilation and thus I tried and have the situation as in the video.

Trying to do so and they are silent since I sent the sample video, hopefully they are investigating.

here is a sample video starting when I choose the airport to start (LXGB) and shows what it happens, you can see the initial load just took like 15 sec. the WASM folder have no files, only a works folder inside the A350 folder afterwards

If so I really think I've wasted $80 at the meantime and have no way to solve it, tried a few dozen times and the problem is that the first load after any re-installation the WASM compile time (assume it's the time where pressing start flight and the circle spins on the big map) is 100% within 30 sec and then nothing is complied, all sidestick, throttle just don't respond and no screen/battery not working at all.... tried the -900, -1000, fresh install, nothing really make it work..

Just out of curiousity, for the "first load could take up to 20min", does that mean even if I load to the "ready to fly" tab appears (which never exceed 30 sec in my case...) I cannot press the ready to fly button and need to say, in a spawn on runway situation wait till the engine blades turn??? also can I switch to another window to let it complie the WASM in background (e.g. watch some youtube) or need to wait the sim to load 20min at least before doing something?

Tried another night and even delete the whole community folder and only leaving in the ini A350 and still, nothing worked... same quick load on to runway but it just stuck with no buttons working, ironically I can use the other in game ini A320, fenix A320, FBW A380 all fine

Yes, tried at least half a dozen times... it just don't work

This is one of the trial, started on kai tak runway and nothing pops up https://onedrive.live.com/?qt=allmyphotos&photosData=%2Fshare%2F2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd%3Fithint%3Dvideo%26migratedtospo%3Dtrue&sw=bypassConfig&cid=2F6E8D2F5B2E1608&id=2F6E8D2F5B2E1608!sbe6669f1f03b42e0bbcd01ac4a26f2fd&redeem=aHR0cHM6Ly8xZHJ2Lm1zL3YvYy8yZjZlOGQyZjViMmUxNjA4L0VmRnBacjQ3OE9CQ3U4MEJyRW9tOHYwQjM5b1RvaHZQWUdPZmxaN3pzbkp6RXc&v=photos

Tried a dozen times, tried the cathay (official inimanager livery) -1000 varient with duplicated control for the stick and throttle for Fenix A320 and start flight, dead plane, external walk around points mostly usable, internal knobs can turn and button have visual clicks, clicking the GPU port externally lights up the ext power light but batteries button have no response removed the WASM A350 folder, restart on runway in default LXGB, it loaded for <1min, get into the "Start flight" button, nothing worked, only sound, engine not spooling, cockpit door cannot open, only flaps lever and parking brake moves with the TM TCA quadrant, sidestick, rudder etc. stays still Tried a few more times with the default ini builds livery, the -900 varient and even wait with that nothing works state for 30min and still nothing happens. So frustrated for a $81 product, paid the cash, hope for some calibration and good to go, and nothing works..... Tried loading the default in game (I am using MS store) ini A310 and A330, A321, all worked flawlessly, just this A350 don't work at all

edit: I looked through discussions about WASM issues, and when I go into the WASM folder, I find that although my load time is quick even on first load in free flight, the WASM folder only generated an empty works sub folder, and nothing else inside the WASM\inibuilds-aircraft-a350 folder... any idea?

Hi there I've just purchased the A350, using 1.0.12, I can select the aircraft, can load into airport, walk around removed the engine cover, pitot tube cover and open the GPU door, but somehow I just cannot start the battery and no system have any response so I could try to load into the first calibration, anyone have idea????

Same issue here, I just bought the A350 and in FS2024 I just can't get the power on to do my initial config...

Hi there, have been flying on the Fenix A320 prior to the gorgeous A310, while the flight model and lack of FBW tech feels great , one drawback is that the weight and loading seems unable to be synced from simbrief and then have some refueling/ boarding time for immersion, could this be done or will be done in near future?