YS0430

1) It's an iconic airport, that even Asobo didn't include it in the default airport in 2020 later added it as default package 2) It used to have the navigation correctly done in the PREVIOUS ini A350 version, now the runway is flipped after the update, so it is something broken that wasn't how unreasonable for us to request for fixing of something newly broken?

Tried after 1.1.2 to fly to Hong Kong Kai Tak airport IGS 13 and found issues on the Nav data (I am using Navigraph), same cycle before update works fine, after update it have the following issues: 1) The IGS approach pattern disappeared 2) The runway indication is flipped, the end of runway 13 is correct, but the start of runway goes in opposite direction, looks like runway 13 rotated with the end point as axis and become 31, it will guide you to land into the sea if follow the MFD map

Thanks Eddie! One more thing I noticed is that the new build, with the default VFR position of the pilot, the HUD info is not center Ed and readable. While the co pilot view is fine.

Ok, hope the devs can see, I recently tried another livery (the BAE one with a BAE cabin) and BAM, the co pilot appeared again! but once I switched back to either cathay livery and default cabin, the co pilot vanished again. seems like it's a cabin+livery situation. Since I am using all ini livery and cabin, please see if you guys can find out why it is the case and if so, please fix it if possible. (for the default cabin, back in 1.0.9 the cathay livery pack will replace textures and logos to cathay in t he default cabin, but after 1.1.0 it no longer works and only showed the ini builds logo, please also try and see if this can be fixed.)

Hi all, after trying the 1.1.1, the HUD looks great, but I found the default (VFR pilot view as shown) is now zoomed out and not as centered as it should be, so HUD will be offset in the 1000 pilot seat, when I switched to co pilot view the HUD view is centered. Please fix this as the quick reset position switch now becomes in a odd zoom out view... Also if I sat in the co pilot seat the pilot avatar is shown, but when I am flying pilot the co pilot just disappeared in freeflight

I have the co pilot working on 1.0.9 on -1000 variant, which I first purchased, and then it disappeared in 1.1.0 regardless which cabin I chose or which livery I use in the 1000 just don’t have the co pilot in voice or model. Reinstalled the plane a few times and no luck on it.

Damn, mine disappeared since 1.1.0 and uninstalling the a350 didn’t help… don’t tell me I need to wear out my SSD by reinstall the sim again… any ini tech support would have a clue?

anyone got an idea? or it's just after the new cabin pack the livery didn't take effect in the interior anymore? I am using the ini manager livery

The cathay livery on the -1000 varient used to have cathay interior also, but now it seems the default cabin will just show default cabin texture and not the cathay interior?

Finger crossed they won't go that route... this is by far the single most expensive purchase for flight sim but I really loved the A350 being one of the longest plane flying. but then the issues plagued since day 1 is so frustrating...

I do believe they will still try to improve, I understand (try) building a study level aircraft is difficult, but when something as basic as the existing implementation of the co pilot which works fine for the last build is kind of a let down, I was skeptical that I messed something up or they just removed it

Do you still have the pilot/copilot appearing after 1.1.0? My Co pilot just disappeared after 1.1.0

Strange, I just encountered something similar in my 4 hours (+1hour prep) flight and suddenly the plane can still follows the flight path, fms works, but the AP panel, auto pilot altitude hangs, the knobs can be turned but not working..

frustrated... SU2, 1.1.0 I fly from Hong Kong to Paro, opened hwinfo 64 and during cruise I turned to hwinfo page so the monitor will go to sleep mode, about an hour before landing I go back to the PC and found that the altitude panel and flight controls don't work, FMS do respond but can't handle the aircraft, wasted like 4 hours....

Hi there, I've noticed when select load by GSX with full passenger (367), it will load normally but in the loadsheet page it will cap at 357 passengers, until I press set ZFW in the loadsheet page, it seems a minor bug but not too difficult to fix?

So I got a question, for realism should I turn it off or on?

Ok, so I am not the only one without a co pilot..

Burrrrrg, was it? I am so disappointed as I am only flying the -1000 varient and that after I updated the co-pilot is now gone for good, where's the feeling of somebody around?

Tried uninstall the A350 and reinstall it and no luck, the co pilot just disappear for the A350

I updated the A350, del A350 WASM folder, first load in the runway, compliation and system apparently worked, but now the co pilot gone missing????

Hi there I think currently we only have a tail cam and undercarriage cam, which only can see the front landing gear. As I love to do replay in the showcase camera, it would be better to have one more showcase camera to show the main landing gear in the frame also, that is kind of an epic angle for touchdown phase.

Thankyou for the prompt reply, we just pick on these as these are more of a focus when the plane is quite good to begin with, and maybe we are spoiled by the previous MSFS releases. Wish you all can make it from good to great

The engine swirl in the game is kind of an elipsoid on a cone, and during spin it have a very wobbly pattern compared to the youtube IRL ones which is a smooth spiral pattern spinning, could it be fixed in the modelling? I know it's kind of minor issue but since the 3D model is so well built I would hope for this to really improve

Anyone have the issue? whenever I am on approach phase the co-pilot will keep request for destination change to the airport and mess up all ATC messages, it feels really strange, but if I disable the AI ATC, when I am off I will need to do Esc->enable AI ATC and then turn it back off during final, worse still in FS2024 it seems that the assistant tab isnt available on the toolbar?

In the ini manager you can select your community folder location, I put the link of the FS2024 folder into the FS2020 location and install the 2020 version into the 2024 sim, it then worked in the sim but not the 2024. Now after this step I did my second reinstall of the FS2024 (plus all my most used scenery, fenix and FBW) and... bam! the 2024 version loaded!!! first compliation is like 3minutes and finally it worked.