Bob57

This Message is on all liverys, when I want to change Aircraft Settings. I cant change anything myself since the last Update. For example I want bigger sharkles, no way. it says "Option managed by Livery". So, how can i get my own Setting in that Aircraft?

Hi Guys. I made two very nice Ferry Flights in MSFS 2024. No freight, only 25 Passengers. Went from Toulouse to Zürich and from Toulouse to Munich. Worked nicely untill I had to decent. I was at 37.000 feet and on 43.000 feet. When the demand showed up i went dorn to lets say 20.000 and in the ohtre flight down to 10.000 according to Flightplan from Simbrief. Both times when I was approximately 40 Miles away from Airport, I was way to high. Si I had to fly manually down with some 4000 feet/min. I know that is completely wrong. But what did I do wrong before, or do I have to tweek Simbrief. Or is it due to the low Amount of weight? Thanks for constructive critism. By the way it was the A350-900.

I think I got them ok by now. So thank you Guys.

Just made my first full flight (in FS2020, MSFS 2024 after SU1) and I must say I am very satisfyed. As mentioned in your streems we will get more feautuers in the future. On my wishlist is a RAAS and my CoPilot in MSFS 2024. Would that eventually happen?

Hello everyone. The Update seems to have solved a lot of Problems, so thank you for that. What I have now is the following. When I am at the Gate after starting the APU I disconnect the ASU. First it disconnected itself, what I did not want. So I wen to the settings and disabeled that second. But now when I hit APU Bleed, the Flaps roll to Flaps 1 setting. Very strange behaviour. Hao can I avoid that? And second, the display seems to freeze at climbing out of EDDM. The Plane followed the Route but on the Display nothing changed and O could not change from VOR to NAV or Plan Mode.

Solved in the Meantime

That helped, Thank you very much, works now perfectly.

Good evening everyone, I have a question about throttle calibration for the A350 in FS2020. I'm using the Thrustmaster Airbus combo, and it works perfectly with every aircraft—FBW, PMDG, TFDI, 737 Max, all iniBuilds Airbuses, etc.—except for the A350. Thrust reverse works fine, then idle, but the engines remain in reverse (visually). Applying just a little bit of thrust, and it immediately jumps to a minimum of 50%. So my question is: which throttle setting should I use? The normal axis or the one with (0-100%)? Second question: What sensitivity settings do you guys use? I’d really appreciate your tips! Thanks in advance.

As said above, I have sound on my Boxes but when I turn them off to wear Earphones, I have no sound at all. Works on all other Aircrafts. So is there something I missed or something I have to click on? Second Problem impossible to callibrate the Throttles. IDLE is at 50% (Thrustmaster Airbus) is it Throttle Axis or Throttle Axis (0-100%)

the funny fact is, I have no WASM Folder. Reinstalled the Bird with following new features. MSFS 2024 (no SU1) In the Emirates Cockpit only one sound weeeeeeeeeeeeee thats it, no Battery switch sound, no Ground Sounds nothing. Wheels in the ground, not on the ground. Turned over to Lufthansa Livery that worked yesterday for 5 Minutes ==> crash upon loading into EDDM. Just tried FACT, when touching the Mouse, Sim freezes! Ans as said no WASM. On FS 2020 what worked yesterday, no sound at all. GSX not working anymore. So I will delete this Beauty and wait for your hopefully soon coming Updates. I remember I had the same Trouble when the A310 came out, all Problems came from WASM untill Asobo fixed it.

I just tried it in FS2020 with Navigraph. Works!! So maybe I do a few Flights in FS2020 to learn, wait for SU1 which is suppose to be around soon and then switch.

...... I tried using Navigraph. Since then it freezes upon start. No chance to get back. So I guess it is mandatory to use SU1 Beta? That is something I wanted to avoid. On the other Hand Jorge said SU1 is just around the Corner. So the suggestion is instaling the Beta or wait another Week?

Hello and thank you for the great Stream from Yesterday. One Question. Will there be the Co-Pilot seated as in your other Airbusses in MSFS 2024. I miss it in the A300.

Are there any News on the Availability for the A300-600 fpr 2024? As I remember you said compatible from the beginning, latest one week after start of MSFS 2024. Well havent seen it yet.

Thanks for answering. Thought that it was GSX, I do have it and use it, but it only shows Board Passengers. Nothing about freight. I will check again.

Hello there. One rather naiv Question. On YouTube i had seen Freight Loaders and Freight loading into the A300. But what Buttons toggle these actions? Did not find anything.

Thank you. I just looked at it again and had only two variants (default), there was no GE. So I deleted every Livery and have now all four variants. Strange but they are there now.

Two Days ago I bought the A300-600 from your website. Today I looked for some Camera Settings and found a package with four versions. inibuilds-aircraft-a306f inibuilds-aircraft-a306f - PW inibuilds-aircraft-a306r inibuilds-aircraft-a306r-PW But after installation I only have inibuilds-aircraft-a300-600. Are the different engine Versions only defined by the Livery's?

As I understood, the Problem again had something to do with WASM and iniBuilds already fixed it, but Asobo did not load the updatet file to their server until now. And it is always the same, the Dev´s of several Companys are doing a good job to solve Problems that where made by Asobo due to recommendations for the XBOX. After that their Aircraft work fine until Asobo has to play around again! It is impossible to have a solution for PC and XBOX. It will always cause problems. And since Asobo thinks the XBOX is the future, PC Users have to wait.

After Months of waiting for a solution (cant afford a new PC in the Moment) I was informed that with SU13 Problems where solved and the A310 finally worked on my old rig. Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz. This one does not support AVX but maybe it´s not needed, so my Question for the Support Team is, will that A300 have same systems, so I can use it as well, when it is out? Flight was very smooth, planed it with SimBrief and had no Problem. As I remember I had planed 25 to of fuel and when I arrived in EDDH still had 13 to left. I thought the A310 was thirsty. Only the Landing was a bit hard, cause it wouldn´t decent from 3000 to 100 feet. Maybe my fault. Thank you for such a great Bird.

Thanks Gumby you are the first one to give a precise Answer after Weeks of Guessing. Well I will stick then with my PMDG 737, Fenix 320 and FBW A32NX. They work perfectly with enough Frames. A310 deleted.

The same happens to me and I already have written that to the support Team. I have a Intel Core i5-750 with only 8GB of DDR3 SDRAM. And Surprise, every Highend Product works flawlessly with that old Workhorse. Everything on Ultra I get between 25 and 30 FPS on PMDG, Fenix, Just Flight and others. I have 131 Airplanes without any Problems, so please don´t tell me my CPU is to old. I could only repeat on that, your Bird isn´t just like other High End Aircrafts.

And it still does not load, as for many other People too. It's a shame when you have 131 Aircraft working very good on an old Machine and one can't even be loaded.

Well. finishing the Beta is one Thing, waiting for ASOBO to release that one is a way other Thing. We all know, that ASOBO isn't the fastest when it comes to updates from other Developers.

Nice, that you are planning a A300 before everybody can enjoy your A310. I will not enter a bug full Beta Version of the MSFS just to try your affords to make the Baby A310 run for everyone. I can´t even start the Aircraft probably due to a WASM Bug or whatever. So I will just delete your Product and be done.