[GSX-profile for KJFK]

I use the one from RWProfiles for the 2020 Version in the meantime (You can find it in the iniManager). It does seem to somewhat work fine, except the Jetways sometimes not connecting.

But it would be nice if there would be an official / correct one also for this airport.

[Flight Directors Contrast]

Can you please make the flight director bars have more contrast, especially at night. I tried to play with the display brighness (and the contrast), but I'm basically not able to see them, when flying in VR.

[Pilot Camera in VR]

 

On 2/28/2025 at 6:05 PM, Andreas Guther said:

What is important to set the default VR point is a camera called "PilotVR". The good news is that ini hasn't set it in their configuration and that makes it easy to define it without the need to manipulate original files. You find attached or in code a file that solves your issue.

Put it in the following location(s):

%LOCALAPPDATA%\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\SimObjects\Airplanes\inibuilds-aircraft-a350-900\
%LOCALAPPDATA%\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\SimObjects\Airplanes\inibuilds-aircraft-a350-900\

cameras.CFG content:

[VERSION]
major=1
minor=0

[CAMERADEFINITION.100]
Title="PilotVR"
Guid="{840E05DD-C0C9-46FE-A341-27D96569A43F}"
Description=""
Origin="Virtual Cockpit"
MomentumEffect=1
SnapPbhAdjust="None"
SnapPbhReturn=1
PanPbhAdjust="None"
PanPbhReturn=0
UITitle="PilotVR"
Track="None"
ShowAxis="NO"
AllowZoom=1
InitialZoom=0.486519
SmoothZoomTime=5
ShowWeather=0
XyzAdjust=0
ShowLensFlare=0
Category="Cockpit"
SubCategory="Pilot"
SubCategoryItem ="PilotVR"
TargetCategory="None"
ClipMode="Normal"
BoundingBoxRadius=0.1
CycleHidden=0
CycleHideRadius=0
ShowPanel=0
InstancedBased=0
NoSortTitle=0
Transition=0
InitialXyz = 0.02, 0.54, 12.5
InitialPbh = 0.00, 0.00,  0.00

 

cameras.CFG 692 B · 1 download

For the -900 this is perfect, thank you, but for the -1000 this puts me into the gally, could you make the same file for the -1000 also?

[Cabin anouncements stop when changing view]

When I change the view to external the cabin announcements stop. Of course they are not hearable in the outside view, but when I change back to the cockpit they don't continue.

[A350 - FS2024: LOADSHEET not pulling in PAX]

I have the same issue, it only works if I let GSX board the PAX and baggage

[OMDB Enhanced C53 jetway not working]

For me C52 isn't working, but C54 is fine

[Cabin Altitude Issue]

I did some more flights now. I have flown two airframes so far, the FedEx N692FE and the DHL D-AEAF. The problem only occured in the D-AEAF while flying in Europe.
Most of the times it happens, when the framerate of the simulator significantly drops. For me this is e.g. the case when I exit VR.
 

I have captured the problem now in a video. It looks horrible in the beggining, as I am in VR, but right when I exit and the simulator has its moment, the cabin altitude shoots to 69K ft.

 

[Radios not working]

9 hours ago, Nico - Gumby said:

Should be fixed with 1.0.1

Can you check again?

After updating to 1.0.1 it is working now perfectly.
Thank you guys for your work.

[Cabin Altitude Issue]

I will try to make a video later, but now it jumped to 93000ft while in cruise (the aircraftsystems already brought it down to 79000ft)

[Cabin Altitude Issue]

Every time I climb through 10000ft my cabin altitude jumps to 77000ft.
The aircraft systems then slowly get it back to a reasonable value.

Kind regards,
Simon