FAQs

Close the simulator if it is running. Navigate to your your FS24 WASM Folder: Steam: MS Store: Delete the 'microsoft-aircraft-a320neo' folder. This folder and its contents will be re-generated next time you load into a flight with the aircraft. Note: This will reset your EFB Throttle Calibration and EFB Settings so they should re-done the next time you load into the aircraft.

If you're experiencing issues with streamed packages, please follow the below steps to force a re-download of the affected files: Close the simulator. Navigate to the affected aircraft's "Streamed Packages" folder: Steam: MS Store: Delete the folder itself. Restart the sim. The deleted files will be re-streamed from the servers.

If you're experiencing issue of missing sounds (complete or partial) on the streamed packages, please follow the below steps to force a re-download of the affected files: Close the simulator. Navigate to the affected aircraft's "Streamed Packages" folder: Steam: MS Store: Delete all the files in this folder. Restart the sim. The deleted files will be re-streamed from the servers.

Throttle Calibration Calibrating your throttle correctly is key to achieving smooth control in Microsoft Flight Simulator 2024, especially when flying advanced aircraft like the Airbus. The calibration process is managed entirely within the Aircraft Electronic Flight Bag (EFB), and here we provide a step-by-step guide for setting up your throttle axis. General Calibration Steps: Reverse on Axis: If your throttle hardware does not have a reverse axis, make sure to select NO in the "Reverse on Axis" option on the EFB. If your hardware has a reverse axis, select YES to calibrate the reverse detents. Green Bar: This bar represents the current position of …

Your planned SimBrief flightplan may be imported directly into the MCDU via the INIT A page*. Click on INIT button, then click 2R LSK for INIT REQUEST* for the flight plan import. You will receive an AOC RTE UPLINK message in the scratchpad if this is successful. You will still need to fill in the INIT B page and select your SID/STAR/APPROACH via the F-PLN page manually. *Note: This feature only works after you have entered your Simbrief Pilot ID (numbers only) on the Options page. Your Pilot ID is found on the 'Account Settings' page on SimBrief. Options Page - Ensure your Simbrief Pilot ID (2) is entered in the EFB Options tab (1). MCDU Init Page - Th…

There is an Electronic Flight Bag (EFB) located on either side of the cockpit (Captain and First Officer) which is intrinsically linked to the aircraft Flight Management System (FMS). It is also linked to some core simulator functions like setting your desired fuel and payload. Note: Please do not use the Microsoft Flight Simulator weight and balance menu/ universal EFB – this will have no impact, and may cause issues with your flight. Simply click the Menu buttons on the left to navigate the pages. Payload Page – This page allows you to set the fuel and load on the aircraft and apply it to the FMS. You can set your fuel and payload manually using…

https://dispatch.simbrief.com/airframes/share/347385_1701976694015

If using the in-sim ATC menu functions to change the squawk code, the transponder will automatically adjust to this change, however you can manually tune the required code using the keypad (4). To enter a new code the previous one has to be cleared first using the CLR key. The Transponders are powered on by setting the Mode Selector knob (1) to AUTO (activates airborne) or ON (activates immediately) position. The Altitude Reporting Switch (3) in the ON position sends barometric altitude data, equivalent to Mode C. In the OFF position no altitude data is transmitted and the upper ECAM displays "TCAS STBY" in green. The TCAS Traffic Selector Switch (6) is used …

In MSFS 2024, 'Preflight' is the first phase of a flight when you start "cold and dark" from a parking spot / ramp. Your pilot character spawns close to the currently selected aircraft, and it is possible to walk around and check the condition of different parts (indicated with a blue pin in the UI). The following parts can be inspected / removed: Wheel Chocks Engine Covers Nose Gear Wheel & Strut Main Gear Wheels & Struts Elevator Rudder You may exit the pre-flight walkaround at any time by clicking on the door handle or using the user-defined key bind for 'TAKE CONTROL OF CHARACTER' (Default: Shift+C). Control Se…

If your aircraft is not following the flight path correctly, please check your MSFS Assistance settings and ensure that the 4 options highlighted below in red below are switched to OFF.

The CALL/RECEIVE functionality of the Audio Control Panel(ACP) is used to control communications. VHF1 is used for com1, and VHF2 for com2. To hear the ATC, you need to select (pull-out) the appropriate reception knob and tune it's volume (rotate). You will see it lit up (blue) when enabled. To speak with the ATC, you need to select (press in) the appropriate transmission key. You will see it lit up (green) when enabled.

This is normally done using the tiller located on the side console. The tiller can be controlled via the 'NOSE WHEEL STEERING AXIS' binding. For simulation purposes, this can also be linked to the rudder pedals for easier use. To do this, go to the aircraft EFB 'Options' tab, then select 'YES' for the 'RUDDER CONTROLS TILLER' option.