4 hours ago4 hr I just tested out Dubai V2 for the first time. On the whole, it is a very nice upgrade, however there are a few things that I think could/should be improved:1) Many of the surfaces in the interior of Concourses A and B have PBR roughness settings that are too smooth, resulting in super shiny floors and "white streaks" when raymarching reflections are turned on and you're moving the drone camera. It looks horrible. Concourses C and D are much better. The problem goes away if I turn raymarching off, but then I lose all reflections. I tried changing the setting from Low, to Medium to High to Ultra, but none of them look good in concourses C and D.2) Walkaround mode doesn't really work. I understand you've added collision meshes, which is great, but the problem is, you can't easily get into the terminal in walkaround mode from the apron. I tried spawning in the Fenix A320 with a jetway connected and switching to walkaround mode and then walking out of door L1 onto the jetway, and I just fell down to the apron. You should take a leaf out of Aerosoft's book and make your jetways walkable (like their rendition of Stuttgart). And if you make the jetway ladders walkable too, then you might actually have a way of walking into the terminal and benefiting from all that collision work you did.3) The scenery is quite VRAM-heavy. I know it's a big one, but while I get good performance in a Cessna, loading up the Fenix really pushed my RTX 4080 (in 4k with DLSS super-resolution on) to it's limits. I was getting GPU memory overload warnings and that was with most graphic settings on High, and no AI traffic at all. In the Cessna, memory usage was around 10.5Gb. In the Fenix it ranged from 11.5-13Gb depending on where I was looking at. I wonder if the textures could be optimised more? Not everyone has a 90-series card. I know I can turn interior detail off, but that seems a bit of a shame, given all the work you did and the kind of high end system I have.
3 hours ago3 hr Staff 52 minutes ago, Mark_Hazeldine said:I just tested out Dubai V2 for the first time. On the whole, it is a very nice upgrade, however there are a few things that I think could/should be improved:1) Many of the surfaces in the interior of Concourses A and B have PBR roughness settings that are too smooth, resulting in super shiny floors and "white streaks" when raymarching reflections are turned on and you're moving the drone camera. It looks horrible. Concourses C and D are much better. The problem goes away if I turn raymarching off, but then I lose all reflections. I tried changing the setting from Low, to Medium to High to Ultra, but none of them look good in concourses C and D.2) Walkaround mode doesn't really work. I understand you've added collision meshes, which is great, but the problem is, you can't easily get into the terminal in walkaround mode from the apron. I tried spawning in the Fenix A320 with a jetway connected and switching to walkaround mode and then walking out of door L1 onto the jetway, and I just fell down to the apron. You should take a leaf out of Aerosoft's book and make your jetways walkable (like their rendition of Stuttgart). And if you make the jetway ladders walkable too, then you might actually have a way of walking into the terminal and benefiting from all that collision work you did.3) The scenery is quite VRAM-heavy. I know it's a big one, but while I get good performance in a Cessna, loading up the Fenix really pushed my RTX 4080 (in 4k with DLSS super-resolution on) to it's limits. I was getting GPU memory overload warnings and that was with most graphic settings on High, and no AI traffic at all. In the Cessna, memory usage was around 10.5Gb. In the Fenix it ranged from 11.5-13Gb depending on where I was looking at. I wonder if the textures could be optimised more? Not everyone has a 90-series card. I know I can turn interior detail off, but that seems a bit of a shame, given all the work you did and the kind of high end system I have.Thanks for your feedback and suggestions! I will forward these to the team for further review and consideration.To note your 3rd point, we actually tested the VRAM usage against the previous verion and all of our internal tests showed it was using less VRAM. Appreciate your time 🙂 Kyle - Community Manager iniBuilds Ltd. | inibuilds.com
3 hours ago3 hr Author It probably is using less, but it's still pushing my system to the edge. I have a 13900k, 64GB RAM and an RTX 4080 running a single 4k monitor in 4k.I have most settings on High, with a few on Ultra. I use Auto FPS. I run with DLSS super resolution and frame-gen on. I am getting 50-60fps (my FPS are capped at 60). But with a study-level airliner like the Fenix, my VRAM is pushed to around 11.5-12GB.On recommendation from Google AI, I dropped volumetric clouds from Ultra to high, Water Waves from High to Medium and Terrain shadows from 1024 to 512. I'm now sitting at 10.1GB/15.8GB of VRAM when in the default the Cessna 172, in drone view, looking at the plane and terminal. Making those changes doesn't seem to have dropped the VRAM usage below 10GB, but I guess it's slightly better than it was.My point is I had to do a lot of tweaking to get things to be acceptable.
Create an account or sign in to comment