Flew the A380 EA Basic variant under V 1.04. Localiser and glideslope cannot be captured. Both megenta indicators in PFD remain inactive and do not move. But no such issue in the RR variant

15 minutes ago, MarsVenus said:

Flew the A380 EA Basic variant under V 1.04. Localiser and glideslope cannot be captured. Both megenta indicators in PFD remain inactive and do not move. But no such issue in the RR variant

Hi,

Thanks for your report. Which airport did you try this at? I'll try and replicate it on my end.

Thanks again!

On 10/20/2026 at 9:48 PM, iniKyle said:

Hi,

Thanks for your report. Which airport did you try this at? I'll try and replicate it on my end.

Thanks again!

LKPR/06 N0418F280 DOBE8E DOBEN DCT NIRGO T108 LANDU LAND2A EDDM/08L

Saved file and photos showing loc and gs not re-activeAB--LKPR-06-----EDMM-08L.bin

Edited October 23Oct 23 by MarsVenus

4 hours ago, MarsVenus said:

LKPR/06 N0418F280 DOBE8E DOBEN DCT NIRGO T108 LANDU LAND2A EDDM/08L

Saved file and photos showing loc and gs not re-activeAB--LKPR-06-----EDMM-08L.bin

Thanks for your report. Will test this and forward to the team for further review.

On 10/23/2026 at 11:17 PM, iniKyle said:

Thanks for your report. Will test this and forward to the team for furtherUpd

On 10/23/2026 at 11:17 PM, iniKyle said:

Thanks for your report. Will test this and forward to the team for further review.

Update to V 1.06 - EA Basic variant still unable to capture localiser and glideslope on runway extended centreline on launching from a saved game. Both localiser and glideslope magenta "triangle" indicators remain inactive. If game is played from new flight, then ILS can be captured without problem.

I then tried using the same saved game. After launching and flying for a while I used the jump ahead function to jump to a waypoint nearer to the runway for approach. I then extended the runway centreline, flew parallel to the centreline and turned the plane back to capture the localiser and glideslope along the centreline. I was successful in capturing both the localiser and glideslope. Both were active and the aircraft followed the ILS onto the runway. You may want to use the attached saved game starting from EDDF using the AB variant of the Inibuilds A380 v 1.06 to test

AB-EDDF-07C--LFPG-09L-TOD.bin

Edited 13 hours ago13 hr by MarsVenus
Additional info

11 hours ago, MarsVenus said:

Update to V 1.06 - EA Basic variant still unable to capture localiser and glideslope on runway extended centreline on launching from a saved game. Both localiser and glideslope magenta "triangle" indicators remain inactive. If game is played from new flight, then ILS can be captured without problem.

I then tried using the same saved game. After launching and flying for a while I used the jump ahead function to jump to a waypoint nearer to the runway for approach. I then extended the runway centreline, flew parallel to the centreline and turned the plane back to capture the localiser and glideslope along the centreline. I was successful in capturing both the localiser and glideslope. Both were active and the aircraft followed the ILS onto the runway. You may want to use the attached saved game starting from EDDF using the AB variant of the Inibuilds A380 v 1.06 to test

AB-EDDF-07C--LFPG-09L-TOD.bin

Thanks for your report. I will forward this to the team for further review and clarification.

Thanks again!