3 hours ago3 hr TriStar version 1.0.4MSFS Update 5 version 1.7.27.0Mode: INS + GPSIs there any trick to getting past the "OK?" blinking prompt on the Garmin 530? I started by trying the ENT button then all other buttons on the unit (including the big push buttons). Tried with various power sources--ground, APU and all engines on. Plus, double checked that all bus ties were connected (w/ all engines running). Ensured the master radio buttons were turned on. Tried after INS was fully aligned and in NAV. And tried unmapping the Avionics Master key binding which was set. Edited 3 hours ago3 hr by dragon8
3 hours ago3 hr Author UPDATE: Workaround: I restarted the simulator, powered up the aircraft (battery + ground power), waited for the GPS to boot up and the ENT button on the GPS worked as expected to get past the "OK?" prompt. Restarting the flight would be worth a shot if anyone else runs into this. Key here is to make sure the GPS is fully on before performing a bunch of other steps then realizing you can't interact with it. Will incorporate this in my startup procedure.Might be worth suggesting in the following topichttps://forum.inibuilds.com/topic/35983-how-to-gps-navigation-ins-gps/ Edited 2 hours ago2 hr by dragon8
Create an account or sign in to comment