FDAI speed command inverted cueing, roll command bar

[Mike]

The current speed cue on the FDAI is reversed. 
The yellow ring indicates the relationship between current speed (yellow ring) and commanded speed (center horizontal line) This can be seen in: 

Commanded speed is 313 knots with an indicated greater than 313, probably 315 or so based on the speed cue on the FDAI, each wide horizontal line indicates 5 knots. 

Next
The Roll command director will disappear off scale when in heading mode and the commanded roll is maximum

It appears the Roll commands a 30° bank angle

 

But a standard rate turn in a transport category aircraft is a maximum command of 25 degrees.

Thanks,

Mike